Solution
You can add Cinema-Look filters to the movies you have recorded.* The movies will be saved in MP4.
* You can add a cinema-look filter only to movies that were MP4 before conversion.
The procedure for adding Cinema-Look filters to recorded scenes is explained below.
1. Press <
> to set the camcorder to <Playback> mode.
3. Touch [ Convert to MP4].
4. Select the desired video quality of converted movies.
NOTE
Before selecting the video quality, touch [Join Scenes] to join the converted movies into one movie.
Options for converting and resizing movies
| Video quality and resolution of the original scene | Video quality and resolution of the converted scene |
|---|
| 24Mbps (1920×1080) | 17Mbps (1920×1080) | 4Mbps (1280×720) |
|---|
| 24Mbps (1920×1080) | ○ | ○ | ○ |
| 17Mbps (1920×1080) | ○ | ○ | ○ |
| 4Mbps (1280×720) | - | - | ○ |
5. Touch the individual scenes you want to decorate.
- A checkmark
will appear on the scenes you touch. The total number of selected scenes will appear next to the 
.
- Touch a selected scene to remove the checkmark.
NOTE
To remove all checkmarks at once, touch [Remove All] > [Yes].
9.
Select the filter you want to add, and then
touch [OK].
NOTE
To remove the filter, touch [FILTER1-7].
10. Touch [START] to convert the scene with the filter added.
NOTE
Touch [STOP] to interrupt the operation while it is in progress.
This concludes the procedure for adding Cinema-Look filters to recorded scenes.
NOTE
- After repeatedly recording, deleting and editing scenes (fragmented memory), MP4 conversion may stop working correctly.
- The following scenes cannot be converted/resized using MP4 conversion.
- Slow motion scenes recorded using 3 Mbps video quality ([x1/4] speed).
- Interval scenes with the
icon.
