Adding a Date Stamp when Shooting (PowerShot SX730 HS)
27-Mar-2017
8203421400
Solution
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm beforehand that the date and time are correct.
IMPORTANT
- In some shooting modes it may not be possible to configure the [Date Stamp] setting.
- For setting or changing the date and time, please refer to the [Setting or Changing the Date and Time (PowerShot SX730 HS)].
REFERENCE
- For a list of shooting modes in which the [Date Stamp] setting can be configured.
[ 
: Manual ] , [ 
: Aperture Value ] , [ 
: Time value ] , [ 
: Program AE ] , [ 
: Hybrid Auto ] , [ 
: Auto ] , [ 
: Sports ] , [ 
: Portrait ] , [ 
: Smart Shutter (
: Smile, 
: Wink Self-Timer, 
: Face Self-Timer) ] , [ 
: Fireworks ]
: Manual ] , [ : Aperture Value ] , [ : Time value ] , [ : Program AE ] , [ : Hybrid Auto ] , [ : Auto ] , [ : Sports ] , [ : Portrait ] , [ : Smart Shutter ( : Smile, : Wink Self-Timer, : Face Self-Timer) ] , [ : Fireworks ]- The procedure for adding a date stamp to images during shooting is explained below.
1. Turn the camera on.
2. Press the [MENU] button.
3. Press the [ 
], [ 
] buttons to select [Date Stamp 
].
], [ ] buttons to select [Date Stamp ].
4. Press the [ 
] , [ 
] buttons to choose [Date] or [Date & Time].
] , [ ] buttons to choose [Date] or [Date & Time].
- Press the [MENU] button when finished.
5. When [Date Stamp] is set to [Date] or [Date & Time], [ ] is displayed on the LCD monitor.
] is displayed on the LCD monitor.
6. The [Date Stamp] will be added to the images as shown below:
: [Date]
: [Date & Time]