Registering a Paper Size and Type
11-Sep-2015
8202735900
Solution
NOTE
- To specify a custom paper size, you need to register that size before hand.
1. Press 
(
).
().2. Use 
/
to select <Drawer 1> or <Drawer 2>, and press 
.
/ to select <Drawer 1> or <Drawer 2>, and press .- <Drawer 2> is displayed only when the optional paper feeder is installed.
3. Select the paper size, and press .
.
NOTE:
If the loaded paper size is not displayed
- Select <Other Sizes>, and press .
About <Free Size>
- If you frequently change sizes of paper to load, you can specify <Free Size>, which saves you the trouble of changing the paper size setting each time you print. You can make a setting so that an error message will be displayed when the paper size set in the printer driver is rather different from the size of the loaded paper.
4. Select the paper type, and press .
.
The screen shown here is displayed when paper is loaded in the multi-purpose tray. Follow the on-screen instructions to specify settings that match the size and type of the loaded paper.
NOTE
If the screen shown above is not displayed when paper is loaded
- If you always load the same paper in the multi-purpose tray, you can skip the paper setting operations by registering the paper size and type as the default setting. When the default setting is registered, however, the screen shown above is not displayed. To display the screen, select <Specify When Loading Paper>.
1. Use / to select the paper size, and press .
/ to select the paper size, and press .
When loading custom size paper1-1. Select <Custom>, and press .
.
1-2. Specify the length of the <X> (shorter) side.
- Select <X>, and press .
- Input the length of the <X> side using / or the numeric keys, and press .
1-3. Specify the length of the <Y> (longer) side.
- Select <Y>, and press .
- Input the length of the <Y> side, and press .
1-4. Select <Apply>, and press .
.
NOTE:
If the loaded paper size is not displayed
- Select <Other Sizes>, and press .
About <Free Size>
- If you specify <Free Size>, you can save the trouble of changing the paper size setting each time you print. You can make a setting so that an error message will be displayed when the paper size set in the printer driver is rather different from the size of the loaded paper.
2. Select the paper type, and press .
.
You can register default paper settings for the multi-purpose tray. Registering default settings can save yourself the effort of having to specify the settings each time you load the same paper into the multi-purpose tray.
NOTE
- After the default paper setting is registered, the paper setting screen is not displayed when paper is loaded, and the same setting is always used. If you load a different paper size or type without changing the paper settings, the machine may not print properly. To avoid this problem, select <Specify When Loading Paper> in step 3, and then load the paper.
1. Press ().
().2. Use / to select <Multi-Purpose Tray>, and press .
/ to select <Multi-Purpose Tray>, and press .
3. Select the paper size, and press .
.
Registering a custom paper size3-1. Select <Custom>, and press .
.
3-2. Specify the length of the <X> (shorter) side.
- Select <X>, and press .
- Input the length of the <X> side using / or the numeric keys, and press .
3-3. Specify the length of the <Y> (longer) side.
- Select <Y>, and press .
- Input the length of the <Y> side, and press .
3-4. Select <Apply>, and press .
.
NOTE:
If the loaded paper size is not displayed
- Select <Other Sizes>, and press .
About <Free Size>
- If you frequently change sizes of paper to load, you can specify <Free Size>, which saves you the trouble of changing the paper size setting each time you print. You can make a setting so that an error message will be displayed when the paper size set in the printer driver is rather different from the size of the loaded paper.
4. Select the paper type, and press .
.
You can register up to three frequently used custom paper sizes.
1. Press ().
().2. Use / to select <Register Custom Paper>, and press .
/ to select <Register Custom Paper>, and press .
3. Select <Not Registered>, and press .
.
- If paper sizes <1> to <3> have already been registered, either change or delete the setting to continue. The procedures for changing and deleting these settings are described below.
Changing a setting3-A-1. Select the registered size you want to change, and press .
.3-A-2. Select <Edit>, press , and proceed to step 4.
, and proceed to step 4.
Deleting a setting3-B-1. Select the registered size you want to delete, and press .
.3-B-2. Select <Delete>, and press .
.3-B-3. Select <Yes>, and press .
.
4. Specify the paper size.
4-1. Specify the length of the <X> (shorter) side.
- Select <X>, and press .
- Input the length of the <X> side using / or the numeric keys, and press .
4-2. Specify the length of the <Y> (longer) side.
- Select <Y>, and press .
- Input the length of the <Y> side, and press .
4-3. Select <Apply>, and press .
.
5. Select the paper type, and press .
.
Selecting a Registered Custom Paper SettingThe paper sizes that are registered in the procedure above are displayed on the screen for selecting the paper size.
When selecting the paper size for the paper drawerOn the screen to specify the size of the paper that is loaded in the paper drawers, the registered paper sizes are displayed.
NOTE:
Of the registered paper sizes, only those that can be loaded in a paper drawer are displayed.
When selecting the paper size for the multi-purpose trayWhen paper is loaded in the multi-purpose tray, the screen for selecting the paper size for the multi-purpose tray is displayed. The registered paper sizes are displayed on this screen.
NOTE:
The registered paper sizes are displayed when you set the default paper settings for the multi-purpose tray. From the screen, you can select one of the displayed sizes as the default paper size for the multi-purpose tray.
You can ensure that only frequently used paper sizes are shown in the screen for selecting the paper size setting.
1. Press ().
().2. Use / to select <Select Frequently Used Paper Sizes>, and press .
/ to select <Select Frequently Used Paper Sizes>, and press .
3. Select <Multi-Purpose Tray>, <Drawer 1> or <Drawer 2>, and press .
.- <Drawer 2> is displayed only when the optional paper feeder is installed.
4. Clear the check boxes for the paper sizes you do not want to be displayed.
- Select a paper size and press to clear the check box.
- Ensure that only the check boxes for the paper sizes you use frequently are selected.
NOTE:
- To display the paper sizes whose check boxes have been cleared, select <Other Sizes> in the paper size selection screen.
5. Select <Apply>, and press .
.