Solution
To restrict the focus to subjects at close range, set the camera to [Macro] (
).
IMPORTANT
- The following section explains the setting procedures when the camera’s shooting mode has been set to [Program AE] ().
- Macro cannot be set in the following shooting modes:
[Hybrid Auto] (
), [Auto] (
), [Creative Shot] (
), [Self-portrait] (
), [Star] (
), [Star Portrait] (
), [Star Nightscape] (
), [Star Trails] (
), [Star Time-Lapse Movie] (
), [Fireworks] (
)
Setting the focus range to [Macro]
- The focus range can be set to [Macro] using the procedures explained below.
1. Press the power button to turn the camera on.
2. Press the <
> button to display the setting screen.
3. Press the <
><
> buttons to choose [
: Macro ], and then press the <
> button.
4. Once the setting is complete, [Macro] (
) is displayed.
REFERENCE
- If the flash fires, vignetting may occur.
- To prevent camera shake, try mounting the camera on a tripod and shooting with the camera set to [Self-Timer] ().
NOTE
- The screen indications when operating the zoom lever in [Macro] () mode are as follows.
In the
yellow bar display area below the zoom bar,
[
] will turn gray and the camera will not focus.
The shooting distance for each [Focusing Range]