Solution
To play back movies recorded with the camera, follow the procedures below.
1. Set the camera’s power switch to < ON >.
2. Press the <

> button to display the image.
3. Turn the <

> dial to select the movie to be played. In the single-image display, press <

>.
- With the (
) single-image display, the <
> icon displayed on the upper left indicates a movie.
- In the (
) index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played from the index display, press <
> to switch to the single-image display.
The movie editing panel will be displayed at the bottom of the screen.
4. Turn the <

> dial to select [

], then press <

>.
The movie will start playing.
- You can pause the movie playback by pressing <
>.
- You can adjust the sound volume during movie playback by turning the <
> dial.
IMPORTANT
- Before listening to a movie’s sound through headphones, turn down the volume to prevent hurting your ears.
- The camera may not be able to play movies shot with another camera.
NOTE
- With a fully-charged Battery Pack LP-E6N, the continuous playback time at room temperature (23°C/73°F) will be approx. 3 hr. 20 min.
- By connecting commercially-available headphones equipped with a 3.5 mm diameter stereo mini plug to the camera’s headphone terminal, you can listen to the movie’s sound
- If you connect the camera to a TV set to play back a movie adjust the sound volume with the TV set. (Turning the <
> dial will not change the sound volume.) If there is audio feedback, place the camera farther away from the TV set or turn down the TV sound volume.
- If you took a still photo while you shot the movie, the still photo will be displayed for approx. 1 sec. during the movie playback.