Adjusting Exposure Compensation (PowerShot SX60 HS)

Last Updated : 16-Sep-2014
Issue Number : 8202167600

The standard exposure set by the camera can be adjusted in 1/3-stop　increments, in a range of –3 to +3.

IMPORTANT

The following section explains the setting procedures when the camera’s shooting mode has been set to [Program AE] ().

For a list of shooting modes in which exposure compensation cannot be set, please refer to the table at the bottom of the page.

1. Press the <Power> button to turn the camera on.

2. Press the <

> button.

3. As you watch the screen, turn the <

> dial to adjust brightness, and then press the <

> button again when finished.

4. The correction level you specified is now displayed.(-1 has been selected in the example image below.)

Exposure compensation cannot be set in the following shooting modes.

Model	Shooting Mode
PowerShot SX60 HS	, , , , , , ,