Solution
The video signal output from the 3G/HD-SDI terminal*, MON. terminal*, HDMI OUT and AV OUT terminals depends on the clip’s video configuration, the capability of the external monitor (for video output from the HDMI OUT terminal) and on various menu settings.
*

only.
Recording Video Signal Configuration and Video Output Configuration by Terminal
Refer to the following table for the video output configuration from each terminal, depending on the recording video configuration used.

3G/HD-SDI terminal and MON. terminal
Recording video configuration | 3G/HD-SDI terminal output | MON. terminal output *1 |
Bit rate | Frame rate | 3G/HD-SDI setting *2 | MON. setting *3 |
Direct | Compatible | HD *4 | SD |
1920x1080 | 50.00P *5 | 1080/50.00P | 1080/50.00i | 1080/50.00i | 576/50.00i |
50.00i *6 | 1080/50.00i |
25.00P | 1080/25.00P | 1080/25.00PsF | 1080/25.00PsF |
1280x720 | 50.00P | 720/50.00P | 720/50.00P | 720/50.00P |
25.00P | 720/25.00P |
*1: Onscreen displays can be superimposed and output to an external monitor.
*2: [

Video Setup] -> [3G/HD-SDI].
*3: [

Video Setup] -> [MON.].
*4: The zebra pattern can be output to an external monitor.
*5: MP4 clips only.
*6: MXF clips only.
HDMI OUT terminal and AV OUT terminal
Recording video configuration | HDMI OUT terminal output *1 | AV OUT terminal output *1 (SD output) |
Bit rate | Frame rate | MON. setting *2 |
HD *3 | SD | Off *4 |
1920x1080 | 50.00P *5 | 1080/50.00P *7 | 576/50.00i | 1080/50.00P *7 | 576/50.00i |
50.00i *6 | 1080/50.00i | 1080/50.00i or 576/50.00i |
25.00P |
1280x720 | 50.00P | 720/50.00P | 720/50.00P or 576/50.00i |
25.00P |
*1: Onscreen displays can be superimposed and output to an external monitor.
*2: [

Video Setup] -> [MON.].
*3: The zebra pattern can be output to an external monitor.
*4: The video signal will change automatically depending on the capability of the external monitor.
*5: MP4 clips only.
*6: MXF clips only.
*7: Only when [

Video Setup] -> [3G/HD-SDI] is set to a setting other than [Compatible] and [

Video Setup] -> [HDMI] is set to [+1920x1080 50.00P].
Playback Video Configuration and Video Output Configuration by Terminal
Refer to the following tables for the video output configuration from each terminal, depending on the video configuration of the clip being played back.

3G/HD-SDI terminal and MON. terminal
Video configuration of tde clip | 3G/HD-SDI terminal output | MON. terminal output *1 |
Movie format | Bit rate | Frame rate | MON. setting *2 |
HD | SD |
MXF | 1920x1080 | 50.00i/25.00P | 1080/50.00i | 1080/50.00i | 576/50.00i |
1280x720 | 50.00P/25.00P | 720/50.00P | 720/50.00P |
MP4 | 1920x1080/1280x720/640x360 | 50.00P/25.00P | 1080/50.00P | 1080/59.94i |
*1: Onscreen displays can be superimposed and output to an external monitor.
*2: [

Video Setup] -> [MON.].
HDMI OUT terminal and AV OUT terminal
Video configuration of tde clip | HDMI OUT terminal output *1 | AV OUT terminal output *1 (SD output) |
Movie format | Bit rate | Frame rate | MON. setting *2 |
HD | SD | Off *3 |
MXF | 1920x1080 | 50.00i/25.00P | 1080/50.00i | 576/50.00i | 1080/50.00i 576/50.00i | 576/50.00i |
1280x720 | 50.00P/25.00P | 720/50.00P | 720/50.00P 576/50.00i |
MP4 | 1920x1080/1280x720/640x360 | 50.00P | 1080/50.00P *4 | 1080/50.00P *4 1080/50.00i or 576/50.00i |
25.00P | 1080/50.00i |
*1: Onscreen displays can be superimposed and output to an external monitor.
*2: [

Video Setup] -> [MON.].
*3: The video signal will change automatically depending on the capability of the external monitor.
*4: Only when [

Video Setup] -> [HDMI] is set to [+1920x1080 50.00P].