Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused. Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

Wired LAN connection of your printer to an access point

Last Updated : 17-Sep-2014
Issue Number : 8202100600

Before Configuring Wired Settings

REFERENCE

Make sure that the printer is turned on.

1. You will need an Ethernet cable (sold separately).

2. Remove the Cap (A) from the port located on the left side at the back of the printer.

3. Connect the printer and a network device (router, etc.) with an Ethernet cable (B).

CAUTION

Do not connect to any other port.

4. If the HOME button (C) on the printer is lit, touch the HOME button.

5. Flick the screen left or right, then tap [ Setup ].

6. Flick the screen up or down, then tap [ Device settings ].

7. Tap [ LAN settings ].

8. Tap [ Change LAN ].

9. Tap [ Wired LAN active ].

10. Touch the HOME button.

The wired LAN setup is completed.

Install the Software.