How to set Continuous Shooting (PowerShot SX700 HS)
18-Feb-2014
8202046900
Solution
You can hold the shutter button all the way down to shoot continuously.
IMPORTANT
- In the following example procedure, the camera's shooting mode has been set to [Auto] (
). - During continuous shooting, focus and exposure are locked at the position/level determined when you pressed the shutter button halfway.
- Cannot be used with the self-timer.
- Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
- As more shots are taken, shooting may slow down.
- Shooting may slow down if the flash fires.
- Multi-area White Balance is not available. Similarly, [Hg Lamp Corr.] is set to [Off] and cannot be changed.
NOTE
Continuous shooting cannot be set in the following modes:
, 
, 
, 
, 
, 
, 
, 
, or 
1. Press the power button to turn the camera on.
2. Press the <FUNC./SET> (
) button.
) button.3. Press the <
><
> buttons or turn the <
> dial to choose [Drive mode].
><> buttons or turn the <> dial to choose [Drive mode].Press the <FUNC./SET> () button.
) button.
4. Press the < ><> buttons or turn the < > dial to choose [Continuous] (
).
><> buttons or turn the < > dial to choose [Continuous] ().Press the <FUNC./SET> () button.
) button.
5. If the icon for [Continuous] () is displayed on the upper-left part of the screen, the setting procedure is complete.
) is displayed on the upper-left part of the screen, the setting procedure is complete.Hold the shutter button all the way down to shoot continuously.
For more information on the maximum continuous shooting speed, please refer to the table below.
| Model | Shooting Mode | Speed |
|---|---|---|
| PowerShot SX700 HS |  ,  | Approx. 3.1 shots/sec. |
High-speed burst HQ  * | Approx. 8.5 shots/sec. |