• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    Sending images from a camera to an Android™ smartphone

    26-Oct-2020
    8202020600

    Solution

    IMPORTANT
    • In the following explanation, smartphone setting procedures are indicated by the icon, and camera setting procedures are indicated by the icon.
    • In this article, Android™ smartphones and tablets are collectively referred to as smartphones.
    NOTE
    • Keep your fingers or other objects off the Wi-Fi antenna area. Covering this may decrease the speed of your image transfers.
    • Connections require that a memory card be in the camera.
    • Depending on the condition of the network you are using, it may take a long time to send movies. Be sure to keep an eye on the camera battery level.
    • When sending movies to smartphones, note that the supported image quality varies depending on the smartphone. For details, refer to the smartphone user manual.
    • On the screen, wireless signal strength is indicated by the following icons.
    -[ ] high, [ ] medium, [ ] low, [ ] weak
    If a Wi-Fi connection to the camera cannot be made using Camera Connect, please refer to The camera cannot be connected via Wi-Fi using Camera Connect.

    Getting Started
    The procedure for using the Wi-Fi function to send images from a camera to an smartphone is explained in the following four steps. Proceed in order from Step 1.

    Step 1: Confirming the smartphone's OS version
    Step 2: Installing Camera Connect on the smartphone
    Step 3: Connecting the camera to the smartphone
    Step 4: Sending images to the smartphone.



    Step 1: Confirming the smartphone's OS version



    1. Check the smartphone’s specifications.
    • To confirm the Android™ OS version information, check the [Settings] menu ( ) [About device] [Android version].


    NOTE
    • Turning off the sleep function of the smartphone is recommended.
    • The setting procedures and items may differ depending on the Android™ OS version installed on your smartphone.

    • Please refer to the table below for more information on supported OS versions. (as of October 2020)
    DeviceSupported OS version
    Smartphone / TabletAndroid 10.0 / Android 9.0 / Android 8.0-8.1 / Android 7.0-7.1 / Android 6.0

    IMPORTANT
    If your Camera Connect version is 2.7.10 or later, check the Android OS version of your smartphone. If the version is 10.0 or later, you cannnot connect to the camera using NFC functionality.

    Step 2: Installing Camera Connect on the smartphone



    Download Camera Connect from Google Play™ and install it on the smartphone.
    If Camera Connect is already installed on the smartphone, please proceed to
    Step 3: Connecting the camera to the smartphone.

    NOTE
    • The example procedure is shown in Android™ OS 4.0
    • The example screen images from the smartphone are used to explain the setting procedures and may differ from the screens shown on other models. For more information on the model you are using, refer to your smartphone’s instruction manual.

    1. Touch the [Play Store] application on your smartphone to access Google Play™.


    IMPORTANT
    ・The Camera Connect application is free, but separate connection charges for accessing Google Play™ may be applicable.
    ・A Google account is necessary to download Camera Connect.
    ・It is not possible to download Camera Connect to smartphones not equipped with GooglePlay™.
    ・Downloading the application via a cellular network may take longer than downloading via Wi-Fi.

    2. Touch the search icon



    3. Enter [Camera Connect] in the search field, and then touch [Search].



    4. Choose [Camera Connect] from the displayed search results, and install it on the smartphone.
    After installation has been completed, tap the [Home] button to return to the Home Screen.

    5. Touch the menu key, and then touch [Settings] ().

    6. Confirm that the smartphone is not set to [Airplane mode].

    7. Set the [Wi-Fi] switch to [ON], and then touch [Wi-Fi].




    Step 3: Connecting the camera to the smartphone


    IMPORTANT
    The position and shape of the operation buttons, screens displayed, and setting items may differ according to the camera model you use.

    • Procedures for using the two connection methods below are explained in the following sections.


    NOTE
    Simply press the [ ] button to connect the devices. This simplifies sending images to a smartphone.


    NOTE
    You can connect the camera to a smartphone as you would connect it to a computer or other device. Multiple smartphones can be added.


    A : Pressing the Mobile Device Connect button to connect with the smartphone, and saving images from the camera to the smartphone.

    A-1. Press the camera’s < Mobile device connect > ( ) button.
    (Hereafter referred to as the [ ] button.)


    NOTE
    • When making Wi-Fi settings for the first time, a screen will appear for you to register a nickname for the camera.
    This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi.
    Press the [ ] button to display the keyboard, and use it to enter a nickname for the camera.

    A-2. Press the [ ], [ ] buttons to choose [ ], and then press the [ FUNC./SET ] ( ) button.





    A-3. The camera’s SSID is displayed on the screen.


    REFERENCE
    • When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it.
    • To change access points, select [Switch Network] from the screen that will be displayed when the connection is being established.

    A-4. Choose the SSID (network name) displayed on the camera’s screen from the list of access points displayed on the smartphone.


    NOTE
    For better security, you can require password input by accessing MENU and choosing [ ] tab [Wi-Fi Settings] [Password] [On]. In this case, enter the password displayed on the camera in the password field on the smartphone when it is displayed.

    • After confirming that the smartphone and the camera are connected, touch the [Home Button] to return to the [Home Screen].

    A-5. Tap the [Canon CC] ( ) application icon on the smartphone to start [Camera Connect].



    • When the smartphone is recognized by the camera, a screen for selecting the device to connect with will be displayed on the camera.

    A-6. Press the [ ], [ ] buttons to choose the smartphone you want to connect with, and then press the [ FUNC./SET ] ( ) button.



    A-7. After a connection is established with the smartphone, the smartphone’s name is displayed on the camera. (This screen will close in about one minute.)


    REFERENCE
    • Once you have connected to a smartphone initially via Wi-Fi by pressing the [ ] (Mobile device connection) button, you can simply press the [ ] (Mobile device connection) button after that to connect again for viewing and saving camera images on connected devices.
    • One smartphone can be registered to the [ ] (Mobile device connection) button.
    • Once a connection has been established with a smartphone, you can automatically reconnect to the registered device by simply pressing the [ ] button, even if the camera has been turned off.
    NOTE
    • To clear smartphones registered to the camera, press the <MENU> button to choose [Mobile Device Connect Button] on the [ ] tab, and then touch [OK] on the confirmation screen to complete the process.
    If you wish to register a different smartphone to the [ ] button, clear the one currently registered first.
    Please proceed to Step 4: Sending images to the smartphone.


    B : Pressing the Wi-Fi button to connect with the smartphone, and saving images from the camera to the smartphone.

    B-1. Press the < Playback > ( ) button to turn the camera on.

    B-2. Press the < Wi-Fi > ( ) button.


    NOTE
    • When making Wi-Fi settings for the first time, a screen will appear for you to register a nickname for the camera.
    This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi.
    Press the [ ] button to display the keyboard, and use it to enter a nickname for the camera.

    B-3. Press the [ ], [ ], [ ], [ ] buttons to choose [ ], and then press the [ FUNC./SET ] ( ) button.






    B-4. Press the [ ], [ ] buttons to choose [Add a Device], and then press the [ FUNC./SET ] ( ) button.



    B-5. The camera’s SSID is displayed on the screen.



    B-6. Choose the SSID (network name) displayed on the camera’s screen from the list of access points displayed on the smartphone.


    NOTE
    For better security, you can require password input by accessing MENU and choosing [ ] tab [Wi-Fi Settings] [Password] [On]. In this case, enter the password displayed on the camera in the password field on the smartphone when it is displayed.

    • After confirming that the smartphone and the camera are connected, touch the [Home Button] to return to the [Home Screen].

    B-7. Tap the [Canon CC] ( ) application icon on the smartphone to start [Camera Connect].



    • When the smartphone is recognized by the camera, a screen for selecting the device to connect with will be displayed on the camera.

    B-8. Press the [ ], [ ] buttons to choose the smartphone 's nickname, and then press the [ ] button.



    B-9. Press the [ ], [ ] buttons to choose [Yes], and then press the [ FUNC./SET ] ( ) button.
    You can now use the smartphone to browse, import, or geotag images on the camera or shoot remotely.
    REFERENCE
    • You can change privacy settings for registered smartphones.

    B-10. The following screen appears.



    B-11. Once you have connected to the smartphone, a screen like the one below will appear.


    NOTE
    • You can connect to smartphones that you have already connected to by choosing them on the [Select a Device] screen in step B-4.
    • After you have accessed the Wi-Fi menu once, you can access it again by pressing the [ ] button. The recent target device is listed first, so you can easily connect again by pressing the [ ], [ ] buttons to choose it. To add a new device, display the device selection screen by pressing the [ ], [ ] buttons, and then configure the setting. If you prefer not to display recent target devices, press the <MENU> button, and on the [ ] tab, choose [Wi-Fi Settings] [Target History] [Off].
    • To add multiple smartphones, repeat the above procedures starting from step B-3.

    B-12. Touch [Images on camera ] in Camera Connect.





    Step 4: Sending images to the smartphone



    1. Use the smartphone to import images from the camera to the smartphone.
    When the camera is connected to the smartphone, a list of the images on the camera will appear in [Camera Connect].



    2. After the screen refreshes, choose the desired images, and then touch [Save] on the bottom right of the screen. The selected images will be saved to the smartphone.



    3. After the images have been saved, touch the [Home] button to return to the menu screen.



    4. To end the connection, touch the [ ] icon displayed in the upper right of the screen, and then touch [Yes].



    When the connection is ended, the camera will automatically turn off.
    NOTE
    • To control the camera manually, either end the connection from the smartphone or restart the camera after pressing the power button to turn it off momentarily.



    The camera cannot be connected via Wi-Fi using Camera Connect
    The information registered to the smartphone for CameraWindow cannot be used for Camera Connect. Therefore, it will be necessary to re-register connection information for Camera Connect.
    The procedures for making connections with Camera Connect are explained below.

    1. Press the [Playback] ( ) button.

    2. Press the [Wi-Fi] ( ) button.

    3. A list of settings registered to the camera will be displayed. Press the [ ], [ ] buttons to display the [Select a Device] screen.





    4. Press the[ ] [ ] [ ] [ ] buttons to choose [ ], and then press the [ FUNC./SET ] () button.



    5. Press the [ ], [ ] buttons to choose [Edit a Device], and then press the [ FUNC./SET ] ( ) button.



    6. Choose the name of the smartphone you installed the Camera Window app on, and then press the [FUNC./SET] ()button.



    7. Choose [Erase Connection Info], and then press the [FUNC./SET] ()button.



    8. Choose [OK], and then press the [FUNC./SET] ()button.



    9. When the [Select a Device] screen is displayed, perform the procedures explained from step B-4 in Step 3: Connecting the camera to the smartphone to complete the settings.



    NOTE
    When you have registered multiple smartphones to the camera, the [Edit a Device] screen will be displayed if connection settings are erased. In this case, press the [MENU] button to display the [Select a Device] screen, choose [Add a Device], and then press the [FUNC./SET]()button.

    *Android™, and Google Play™ are trademarks of Google Inc.