How to set High-Speed Continuous Shooting (High-speed Burst) and Group Playback
06-Feb-2014
8202001100
Solution
You can shoot a series of shots in rapid succession by holding the shutter button all the way down.
Approx. 10.5 shots/sec. can be taken.
NOTE
- The resolution is [
] (2304 x 1728) and cannot be changed. - Focus, image brightness, and color are determined by the first shot.
- Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
- As more shots are taken, shooting may slow down.
1. Set the mode switch to <
> and press the power button.
> and press the power button.2. Press the <FUNC./SET> (
) button.
) button.3. Press the <
><
> buttons to choose [Shooting Mode] (If the settings have not been changed [ 
] ) will be displayed).
><> buttons to choose [Shooting Mode] (If the settings have not been changed [ ] ) will be displayed).Press the <FUNC./SET> () button.
) button.
4. Press the <><> buttons to choose [High-Speed Burst] (
), and then press the <FUNC./SET> (
) button.
><> buttons to choose [High-Speed Burst] (), and then press the <FUNC./SET> () button.
5. If the [High-speed Burst] () icon is displayed on the upper-right part of the screen, the setting is completed.
) icon is displayed on the upper-right part of the screen, the setting is completed.
Hold the shutter button all the way down to shoot continuously.
When playing back images, images taken in [High-speed Burst] ( )mode are displayed in a group with only the first image displayed, however, grouped images can also be viewed individually.
)mode are displayed in a group with only the first image displayed, however, grouped images can also be viewed individually.IMPORTANT
If you erase a grouped image, all the images in the group will also be erased. Be sure to exercise adequate caution.
REFERENCE
- To view images taken in [High-speed Burst] () mode as a group, press <MENU> (
), and then select [On] for [Group Images] in the [Playback Menu] ( 
) tab. (By default, [On] is selected.)
1. Press the <
>< 
> buttons to choose an image labeled with [ 
], and then press the <FUNC./SET> () button.
>< > buttons to choose an image labeled with [ ], and then press the <FUNC./SET> () button.
2. Press the <>< > buttons to choose [ 
], and then press the <FUNC./SET> () button.
>< > buttons to choose [ ], and then press the <FUNC./SET> () button.
3. Pressing the <>< > buttons will display only images in the group.
>< > buttons will display only images in the group.To cancel group playback, press the <FUNC./SET> () button, choose [ ] in the menu, and press the <FUNC./SET> () button again.
) button, choose [ ] in the menu, and press the <FUNC./SET> () button again.NOTE
- During group playback, you can use the menu functions accessed by pressing the <FUNC./SET> () button. You can also browse through images quickly "Navigating through Images in an Index" and magnify them "Magnifying Images" . By choosing [All Images in Group] for "Protecting Images", "Erasing Multiple Images at Once", "Adding Images to the Print List (DPOF)" , or "Adding Images to a Photobook", all images in the group can be manipulated at once.
- To ungroup images so that they are displayed only as single still images, press the <
> button, choose [Group Images] on the [ ] tab, and then choose [Off]. However, grouped images cannot be ungrouped during individual playback.