Erasing Images

Last Updated : 12-Dec-2014
Issue Number : 8201984900

Solution

This section explains how to erase images.

IMPORTANT

Be careful when erasing images, because they cannot be recovered. However, protected images cannot be erased.

Erasing Images Individually

You can erase unwanted images individually.

1. Press the <Playback> (

) button to turn on the camera.

2. Press the [

], [

]buttons to choose an image.

3. Press the <

> button.

4. After [Erase?] is displayed, press the [

], [

] buttons to choose [Erase], and

then press the <FUNC./SET> (

) button.

The current image is now erased.

NOTE

To cancel erasure, press the [ ], [ ] buttons to choose [Cancel], and then press the <FUNC./SET> () button.

Erasing images in a batch

You can select images and erase them in a batch.

IMPORTANT

Be careful when erasing images, because they cannot be recovered. However, protected images cannot be erased.

1. Press the <Playback> (

) button to turn on the camera.

2. Press the <

> button and choose [Erase] on the [

] tab.

3. Press the [

], [

]buttons to choose [Select] and press the <FUNC./SET> (

) button.

REFERENCE

You can select [All Images] to erase all images at once.

4. Press the [

], [

]to select the desired images, and then press the <FUNC./SET> (

) button. [

] is displayed.

NOTE

To cancel selection, press the <

> button again. [

] is no longer displayed.

5. Repeat step 4 to specify other images.

6. Press the <

> button. A confirmation message is displayed.

Press the [

], [

] buttons to choose [OK], and then press the <FUNC./SET> (

) button.