Cropping (trimming) images for printing (SELPHY CP910)

Last Updated : 15-Apr-2014
Issue Number : 8201961600

You can crop and print part of an image.

IMPORTANT

Images may not be displayed or printed correctly depending on their size or if they have been edited on a computer.
JPEG images conforming to the Exif standard can be printed with SELPHY.

1. Choose the image you want to crop.

2.

Press the <EDIT> button,and then

press the <OK> button.

3. A crop frame is displayed, showing the image area that will be cropped.

4. Adjust the image area to crop.

NOTE

To switch the crop frame between portrait and landscape orientation, press the <EDIT> button.
To move the crop frame, press the buttons.
To enlarge the crop frame, press the <> button, and to reduce it, press the <> button.

5. To confirm the cropping area and return to the image display screen, press the <OK> button. (

) is now shown in the lower left.

NOTE

To crop other images for printing with the first one, repeat steps 1 – 5.
If you want to change the cropping range after setting it, press the <EDIT> button in the image display screen, select [Adjust Cropping], and press the <OK> button to repeat Steps 4 to 5.
If you want to cancel the cropping range after setting it, press the <EDIT> button in the image display screen, select [Reset Cropping], press the <OK> button to display the reset cropping screen, and then press the <OK> button again.
Cropping areas you have set are cleared if you turn off SELPHY or remove the memory card before printing.
You can specify cropping for up to 99 images at once.
Cropping is not available when printing with [Print All Images] or [DPOF Print] or when [Page Layout] is set to [Index] or [Shuffle].
The cropping aspect ratio indicated by the frame displayed on images cannot be adjusted.
To change the number of prints, press the <><> buttons on the image display screen in step 5. Note that specifying zero prints will not clear cropping settings.

6. Press the <

> button to start printing.