How to insert paper (SELPHY CP820)
05-Aug-2013
8201901900
Solution
IMPORTANT
- Use only paper in a genuine Canon Color Ink / Paper Set for SELPHY CP printers. Other paper, such as regular postcards or paper for SELPHY ES printers, cannot be used.
- Never do the following, which may damage the printer or cause malfunction.
- Loading paper upside-down, with the glossy and back sides reversed
- Bending or separating paper at the perforations before printing
- Using label paper whose upper label surface is peeling off or has been partially pulled up
- Writing on paper before printing
- Reusing paper, as by printing on blank areas
1. Check the paper size.
Check the size on the paper cassette (such as "Postcard" or "Card Size") to make sure it matches the size of the ink cassette.
2. Open both covers.
There are two layers of covers. First open the <outer cover>(
), and then the <inner cover> (
).
), and then the <inner cover> (). 3. Load the paper in the paper cassette.
Holding the paper as shown in the above image, load it with the glossy side up. (Do not touch the glossy side of the paper, which may affect print quality.)
IMPORTANT
- Remove any protective sheets from the paper, and load only paper into the cassette.
- The paper cassette holds up to 18 sheets. Loading 19 or more sheets may damage the printer or cause malfunction.
4. Close the inner cover.
Close the inner cover firmly until it clicks into place. Leave the outer cover open when printing.
REFERENCE
- You can use Paper Cassette PCPL-CP400 (sold separately) to print on L-size paper.
- To print on postcard paper, remove the adapter as shown.
