• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    Shooting a person whose face you have registered in the camera with the most suitable settings (Face ID) (PowerShot S200)

    22-Aug-2013
    8201895000

    Solution

    If you register a person ahead of time, the camera will detect that person’s face, and prioritize focus, brightness, and color for that person when shooting. In mode, the camera can detect babies and children based on registered birthdays and optimize settings for them when shooting.
    This function is also useful when searching for a specific registered person among a large number of images
    IMPORTANT
    Personal Information
    • Information such as images of a face (face info) registered with Face ID, and personal information (name, birthday) will be saved on the camera. Additionally, when registered people are detected, their names will be recorded in still images. When using the Face ID function, be careful when sharing the camera or images with others, and when posting images online where many others can view them.
    • When disposing of a camera or transferring it to another person after using Face ID, be sure to erase all information (registered faces, names, and birthdays) from the camera.

    Registering Face ID Information
    You can register information (face info, name, birthday) for up to 12 people to use with Face ID.

    1. Press the power button to turn the camera on.

    2. Press the <> button.

    3. Press the <><> buttons to choose the [Shooting] tab (), press the <><> buttons, or turn the <> dial to choose [Face ID Settings], and then press the <> button.





    4. Press the < >< > buttons to set [Face ID Settings] to [On].



    5. Press the <><> buttons to choose [Add to Registry].



    6. Choose [Add a New Face].



    7. Aim the camera so that the face of the person you want to register is inside the gray frame at the center of the screen.
    A white frame on the person’s face indicates that the face is recognized. Make sure a white frame is displayed on the face, and then shoot.



    If the face is not recognized, you cannot register face information.

    8. After [Register?] is displayed, press the <>< > buttons to choose [OK], and then press the <> button.



    9. The [Edit Profile] screen is displayed. Press the <> button.



    10.Press the <><><><> buttons, or turn the <> dial to choose a character, and then press the <> button to enter it. (You can enter up to 10 letters.)
    Press the <> button to return to the [Edit Profile] screen.



    Turn the < > ring or choose [ ] or [ ] and press the < > button to move the cursor.
    Choose [ ] and press the <> button to delete the previous character.

    11. Press the <>< > buttons to choose [Birthday], and then press the <> button.



    12. Press the <>< > buttons to choose an option, and Press the <>< > buttons to make the settings.
    Once you are finished, press the <> button.



    13. Press the <><> buttons to choose [Save], and then press the <> button.



    14. After a message is displayed, press the <>< > buttons to choose [Yes], and then press the <> button.



    Registered faces are more easily recognized if you add a variety of face information. In addition to a head-on angle, add a slight side angle, a shot when smiling, and shots inside and outside.
    To register up to 4 more points of face information (expressions or angles), repeat steps 7 – 8.
    IMPORTANT
    • The flash will not fire when following step 7.
    • A Babies icon will not be displayed in [ ] mode unless you register a birthday in step 12.
    NOTE
    You can overwrite registered face info, and add face info later if you have not filled all 5 face info slots

    Using Face ID when shooting
    If you register a person ahead of time, the camera will prioritize that person as the main subject, and optimize focus, brightness, and color for that person when shooting.
    REFERENCE
    To use Face ID when shooting, < > > [Shooting] tab () > [Face ID Settings] > [Face ID] must be set to [On]. (By default, [On] is selected.)

    When you point the camera toward a subject, the names of up to 3 registered people will be displayed when they are detected.



    Shoot.

    Displayed names will be recorded in still images. Even if people are detected, but their names are not displayed, the names (up to 5 people) will be recorded in the image.

    IMPORTANT
    • People other than those registered may be mistakenly detected as the registered person if they share similar facial features.
    NOTE
    • Registered people may not be correctly detected if the captured image or scene differs drastically from the registered face information.
    • If a registered face is not detected, or not easily detected, overwrite registered information with new face info. Registering face info right before shooting will allow for easier detection of registered faces.
    • If a person is mistakenly detected as another person and you continue shooting, you can edit or erase the name recorded in the image during playback
    • Because faces of babies change quickly as they grow, you should update their face info regularly.
    • When information display is set to off, names will not display, but will be recorded in the image.
    • If you don’t want names to be recorded in still images, choose [Face ID Settings] on the [ ] tab, choose [Face ID], and then choose [Off].
    • You can check names recorded in images in the playback screen (simple information display).