• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    Adding a Date Stamp when Shooting

    12-Mar-2014
    8201879900

    Solution

      The camera can add the shooting date to images, in the lower-right corner.

      IMPORTANT
      • Note that date stamps cannot be edited or removed, so confirm beforehand that the date and time are correct.
      NOTE
      • For setting or changing the date and time, refer to Setting or Changing the Date and Time.
      • Date stamps cannot be added when the image type is set to [ ], or [ ]. ([Date Stamp] is set to [OFF] in these modes.)
      • The position and shape of the operation buttons, screens displayed, and setting items may differ according to the model you use. In this example, the procedure is shown on a PowerShot S200 set to the [Program AE] () shooting mode.
      • In some shooting modes it may not be possible to configure the [Date Stamp] setting.
      For a list of shooting modes in which the [Date Stamp] setting can be configured, please refer to the table below.

      The procedure for adding a date stamp to images during shooting is explained below.

      1. Press the <Power> button to turn the camera on.

      2. Press the <MENU> button.

      3. Press the Right button or the Left button to select the [ ] tab.
      Press the Up button of the Down button to select [Date Stamp].
      : Left button : Right button : Up button : Down button



      4. Press the Left button or the Right button to choose [Date] or [Date & Time].
      Press the <MENU> button when finished.



      4. When [Date Stamp] is set to [Date] or [Date & Time], [ ] is displayed on the LCD monitor.



      5. The [Date Stamp] will be added to the images as shown below:
      [Date]
      [Date & Time]

      NOTE
      It is not possible to edit the displayed date, color, style, or position of date stamps.


      • Shooting modes in which the [Date Stamp] setting can be configured:
      ...[Date Stamp] can be added
      ...Shooting mode not available
      ModelsShooting Modes
      MAvTvPLIVEAUTOSCN
      PowerShot G16*---
      PowerShot S120*---
      PowerShot S200----
      PowerShot SX510 HS----
      PowerShot SX170 IS----
      *In C, C1, and C2 mode, [Date Stamp] setting availability varies depending on the assigned shooting mode.