Adding Cinema-Look Filters to Recorded Scenes

    15-May-2013
    8201846300

    Solution

      You can add Cinema-Look filters to AVCHD and MP4 movies saved to a memory, and save them to the other memory card.
      The movies will be saved in MP4.
      REFERENCE
      The effects of Cinema-look filters applied during shooting and those applied when converting to MP4 may differ.

      The procedure for adding Cinema-Look filters to recorded scenes is explained below.

      1. Set the power switch to MEDIA.



      • Open the desired movie index screen.

      2. Touch [ ].



      3. Touch [Convert to MP4 [ ] or [Convert to MP4 [ ].
      *The menu for copying from the memory card used for playback to the other memory card will be displayed.



      4. Touch [OK].



      5. Select the desired video quality of converted movies.


      NOTE
      Before selecting the video quality, touch [Join Scenes] to join the converted movies into one movie.

      6. Touch the individual scenes you want to add the filters to.
      • A checkmark will appear on the scenes you touch. The total number of selected scenes will appear next to the .


      NOTE
      To remove all checkmarks at once, touch [Remove All] > [Yes].

      7. Touch [OK].



      8. Touch [Next].



      9. Touch [FILTER1].



      10. Select the filter you want to add, and then touch [OK].


      NOTE
      To Remove the filter, touch [FILTER1-9].

      11. Touch [START] to convert the scene.


      NOTE
      Touch [STOP] to interrupt the operation while it is in progress.

      12. Touch [OK].



      ・Based on the following options, movies will be converted and then copied .
      Recording mode before conversionVideo quality options
      AVCHD MP4
      28 Mbps LPCM (59.94P),28 Mbps (59.94P)35 Mbps (59.94P) Cannot be converted
      24 Mbps LPCM, 17 Mbps, 5 Mbps 24 Mbps, 17 Mbps 24 Mbps, 17 Mbps, 4 Mbps, 3 Mbps
      4 Mbps 4 Mbps, 3 Mbps
      3 Mbps 3 Mbps
      ● Scenes with a frame rate of 23.98P can be joined only with other scenes with a frame rate of 23.98P. They cannot be joined with scenes with other frame rates.
      ● While converting movies, video and audio signals will not be output from the camcorder's terminals.

      This concludes the procedure for adding Cinema-Look filters to recorded scenes.