• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    Is there a relay recording feature that automatically begins recording to the additional card when the primary card becomes full?

    15-May-2013
    8201842300

    Solution

      You can use relay recording so that if the memory card being recorded on becomes full, the recording will continue uninterrupted on the other memory card.
      The setting procedures for Relay recording are explained below.
      NOTE
      • When you use relay recording, it does not matter which memory card the recording starts on. The recording will continue on the other memory card. However, the camcorder will switch to another memory card only one time.
      • When the camcorder switches form recording on one memory card to another during relay recording, the video will be recorded as two separate relay scenes.
      • With the supplied software, Data Import Utility, you can join relay scenes (either AVCHD or MP4 format) recorded on both memory cards as a single scene and save it on a computer
      • For more on Data Import Utility, please refer to the Related information.

      1. Set the power switch to <CAMERA>.



      2. Touch [ ].



      3. Touch [ ].



      4. Touch [ ].



      5. Drag your finger up and down bring [Dual/Relay Recording] into the orange selection bar, and touch the button.



      6. Touch [ Relay Recording ].



      7. Touch [ ] to close the menu screen.