Using the Remote Live View Function in EOS Utility to Shoot Still Photos and Movies Remotely (EOS REBEL T5i / EOS 700D)
15-Mar-2013
8201805300
Solution
You can operate your camera remotely from EOS Utility and shoot still photos and movies while looking at the subject on the EOS Utility screen. Also, the captured still image is directly saved on your computer; therefore, you can check it with Digital Photo Professional.
After shooting a movie, you can download the image data from the camera's memory card to a computer and save them in a selected folder.
This page describes how to shoot still photos and movies remotely using the Remote Live View function in default settings.
For details on how to change settings to enable Remote Live View shooting, please refer to the instruction manuals (included on the CD-ROM) that came with your camera.
1. Connect your camera and computer, and then turn the camera’s power switch to < ON >.
Please see the Related Information for how to connect the camera to the computer.
2. Set the lens focus mode switch to <AF>.
3. Once EOS Utility starts, click [Camera settings/Remote shooting].
4. The capture window appears. Adjust the settings items for shooting.
IMPORTANT
- You cannot perform RAW processing. If you connect the camera to your computer during in-camera RAW processing, the camera and computer will connect after you finish processing.
- You cannot set [Creative Auto].
NOTE
- You can also use mirror lockup with remote shooting. (You cannot take test shots after setting mirror lockup.)
- Changing the drive mode for self-timer shooting is possible.
For details on shooting still photos, refer to the Shooting Still Photos section; and for details on shooting movies, refer to the Shooting Movies section.
5.　Follow steps 1-4 bellow to set the camera for Live View shooting.
5-1. Click 
to display the [Set-up menu], and then click [Live View/Movie func. set.] ( 
).
to display the [Set-up menu], and then click [Live View/Movie func. set.] ( ).5-2. The [Live View/Movie func. set.] window appears, select [Enable] ( 
)for [LV func. setting] and then click [OK] ( 
).
)for [LV func. setting] and then click [OK] ( ).
6. Click the [Live View shoot.] button.
IMPORTANT
You cannot operate the camera when the [Remote Live View window] is displayed. Pressing the camera's < 
> (Live View shooting) button will also display the Live View image on the camera's LCD monitor, allowing you to view the image while controlling the camera.
> (Live View shooting) button will also display the Live View image on the camera's LCD monitor, allowing you to view the image while controlling the camera.7. The [Remote Live View window] appears, so drag the enlargement display frame to move it to the position where you want to focus.
8. Click [ON].
- AF is executed.
- When focus is achieved, the camera makes a beeping sound and the AF point turns green.
- If focus is not achieved, the AF point turns red.
9. When focus is achieved and the camera is ready for shooting, click the camera release button to shoot.
10. The captured images are transferred to the computer, Digital Photo Professional starts automatically, and the captured images are displayed.
NOTE
- The [Test Shooting] window appears when you click the [Test shooting] button.
During flash shooting, you can take a test shot under the same conditions as an actual shot, and adjust the white balance based on the shot test image.
- You can save shot images to both your computer and a memory card by checkmarking [Save also on the camera’s memory card] in the [Remote Shooting] tab of the [Preferences].
5. Once you have proceeded up to Step 4, click [ 
].
].
IMPORTANT
You cannot operate the camera when the [ ] button is
] button isclicked. To operate the camera, click the [ ] button again or close the [Remote Live View window].
] button again or close the [Remote Live View window].6. The [Remote Live View window] appears, so drag the enlargement display frame to move it to the position where you want to focus.
7. Click [ON].
- AF is executed.
- When focus is achieved, the camera makes a beeping sound and the AF point turns green.
- If focus is not achieved, the AF point turns red.
8. Set the movie functions on the capture window. Generally, the capture window appears behind the Remote Live View window.
8-1. Click 
to display the [Set-up menu], and then click [Live View/Movie func. set.] (
).
to display the [Set-up menu], and then click [Live View/Movie func. set.] ().8-2. The [Live View/Movie func. set.] window appears, select the [movie rec. size] and the [movie exposure] from the list box (
), then click [OK] (
).
), then click [OK] ().
9. Click the [ 
] and begin shooting.
] and begin shooting.- At the bottom left of the [Remote Live View window], a [
] icon and the recording time are displayed. - Click the [ ] again to end shooting.
10. When the [Remote Live View window] closes, the following window appears if some image data remains to be downloaded to your computer. Select [Download].
11. After you click the [Download], the file names of the image data shot in movie mode (movie/still image) appear in a list.
After specifying [Destination Folder] and [File Name], click the [Download] in the window, and image data will be downloaded from the camera's memory card to your computer. Image data having a check mark removed from its file name are not downloaded. Afterward, when downloading image data to your computer from the camera's memory card, please refer to the instruction manuals (included on the CD-ROM) that came with your camera.
Explanations for the Remote Live View operation method are complete.