Adding Transition Effects (Faders) to Scenes (VIXIA HF G20 / LEGRIA HF G25)
05-Feb-2013
8201777700
Solution
The camcorder offers two professional looking transition effects to fade-in or fade-out scenes. You
have the option to activate the fader only one time or every time you start or stop recording.
1. Set the mode switch to <M> or <CINEMA>.
2. Turn on the camcorder and make sure it is set to a recording mode.
3. Touch [ 
].
].
4. 
Drag your finger up and down to display the rest of the panel, and then 
touch [Faders].
Drag your finger up and down to display the rest of the panel, and then touch [Faders].
3. Touch any of the available options.
Touch [ 
(Off)] to turn faders off.
(Off)] to turn faders off. 
The different effects are as shown below.
- Fade Trigger
- Wipe
4. Touch [ 
].
].5. Press <START/STOP> in record pause mode (
) to start recording with a fade in. Press <START/STOP> while recording (
) to fade out and pause the recording.
) to start recording with a fade in. Press <START/STOP> while recording () to fade out and pause the recording.NOTE
- When you apply a fader, not only the picture but also the sound will fade in or out.
- Faders cannot be used in the following cases:
- While using the [Old Movies] cinema-look filter in 
mode.
mode.- When recording scenes with decorations.
- When recording video snapshot scenes.
- While pre-recording is activated.
- You can select whether to fade to/from a black screen or a white screen with the [Fader Setting] setting.