Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused. Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

How do I turn off the setting that automatically deactivates the LCD screen?

Last Updated : 21-Mar-2013
Issue Number : 8201756500

The setting that automatically deactivates the screen cannot be turned off.

However, you can adjust the timing of the setting (Display Off) so that the screen stays on for up to 3 minutes.

Use the following procedure to change the settings for [Display Off].

1. Turn the camera on.

2. Press the <MENU> button to display the menu.

3. Choose [Power Saving] on the [

] tab.

4. Select [Display Off] and push the <

> buttons to adjust the time until the screen deactivates.

・The [Display Off] setting is applied even if you set [Auto Power Down] to [Off]. Moving any of the controls will turn the screen back on.

IMPORTANT

To conserve battery power, you should normally choose [On] for [Auto Power Down] and [1 min.] or less for [Display Off].

NOTE

These power-saving functions are not available when Eco mode [

] is set to [On].

For information on setting Eco Mode, refer to Setting Eco Mode.

This completes the steps for changing the [Display Off] settings.