Solution
<Cause 1>
The setting for [Toner Density] is not appropriate.
<Solution>
Perform the following procedure in the printer driver.
1. Display the [Quality] tab.
2. Click [Advanced Settings].
3. Adjust [Toner Density].
You can specify the same setting from the printer's control panel. For more details, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the printer.
<Cause 2>
[Toner Save] is enabled.
<Solution>
Perform the following procedure in the printer driver.
1. Display the [Quality] tab.
2. Click [Advanced Settings].
3. Set [Toner Save] to [Off].
See Help of the PCL/PS printer driver.
You can specify the same setting from the printer's control panel. For more details, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the printer.
