Fine-Tuning the Paper Feed Amount (Adj. Fine Feed) (iPF9400) (iPF9400S)
29-Nov-2012
8201672900
Solution
If the contrast is uneven or banding in different colors appears at 50 mm (2.0 in) intervals in printed documents, try executing Adj. Fine Feed during printing to fine-tune the feed amount.
NOTE
- The Adj. Fine Feed menu is only displayed during printing.
Additionally, it is displayed when you have selected Automatic or Print Quality in Adj. Priority in Feed Priority.
- Always execute Adj. Quality before Adj. Fine Feed.
Once you execute Adj. Quality, the Adj. Fine Feed value will revert to 0.
Perform adjustment as follows.
1.On the Tab Selection screen of the Control Panel, press 
or 
to select the Settings/Adj. tab (
).
or to select the Settings/Adj. tab ().
NOTE
- If the Tab Selection screen is not displayed, press the Menu button.
2.Press the OK button.
The Set./Adj. Menu is displayed.
3.Press 
or 
to select Adj. Fine Feed, and then press the OK button.
or to select Adj. Fine Feed, and then press the OK button.4.Press 
or 
to select a setting value in the range -5 to 5, and then press the OK button.
or to select a setting value in the range -5 to 5, and then press the OK button.At this time, if banding in dark colors appears, select a setting value in the range 1 to 5, and if banding in light colors appears, select a setting value in the range -1 to -5.