Adjusting the Printhead (iPF9400) (iPF9400S)
Solution
If printed documents are affected by the following problems, try adjusting the printhead.
Execute Nozzle Check in the Control Panel menu to check for printhead nozzle clogging.
For instructions, see "Checking for Nozzle Clogging (iPF9400) (iPF9400S)."
Execute Head Posi. Adj. in the Control Panel menu to adjust the printhead position.
- Normally, execute Standard.
- When printing on special paper, or if printing is not improved after Standard, try Manual.
NOTE
- In the next case, execute Initial adjustmt.
- If adjusting the printhead position has not been performed such as due to an error during initial setup
- If Rep.P.head Print in the Control Panel menu is set to Off and adjusting the printhead position has not been performed when replacing the printhead
Selecting Head Height in the Control Panel menu and changing the printhead height may improve the situation.