Checking inside the printer
08-Mar-2012
8201485100
Solution
IMPORTANT
Operational requirements and restrictions are indicated at the end of this page. Be sure to read these items carefully in order to operate the printer correctly, and to avoid damage to the printer.
1. Open the front cover.
Holding the opening of the front cover, open it gently.
2. Remove the toner cartridge from the printer.
3. Place the toner cartridge into the protective bag.
4. Check inside the printer.
IMPORTANT
Be careful not to touch unnecessary parts inside the printer when checking.
5. Take the toner cartridge out of the protective bag.
6. Hold the toner cartridge properly with the arrowed side facing up as shown in the figure.
7. Push the toner cartridge into the printer until it touches the back of the printer while aligning (A) on both sides of the toner cartridge with the toner cartridge guides inside the printer.
8. Close the front cover.
Holding the opening of the front cover, close it gently.
IMPORTANT
If you cannot close the front cover, check if the toner cartridge is installed properly. If you try to close the front cover forcefully, this may result in damage to the printer.
IMPORTANT
a. When you take the toner cartridge out of the printer for servicing the printer or other purposes, place the toner cartridge into the original protective bag, or wrap it with a thick cloth immediately.
b. Do not touch the high-voltage contact (A) or the electrical contacts (B) shown in the figure, as this may result in damage to the printer.
c. Do not leave the front cover open for a long time after installing the toner cartridge.
NOTE
For details on how to handle a toner cartridge, see "Precautions for handling toner cartridge" in Related Information at the end of this page.