How to Print Out TX/RX Result Report Automatically (MF4680)
30-Jan-2012
8201428700
Solution
TX REPORT1. Press [Additional Functions].
2. Press [Left cursor] or [Right cursor] to select [REPORT SETTINGS], then press [OK].
3. Press [Left cursor] or [Right cursor] to select [SETTINGS], then press [OK].
4. Press [Left cursor] or [Right cursor] to select [TX REPORT], then press [OK].
5. Press [Left cursor] to select the setting you want, then press [OK].
[PRINT ERROR ONLY]: Prints a report only when a transmission error occurs.
[OUTPUT YES]: Prints a report every time you send a document.
[OUTPUT NO]: Does not print a report. Skip to step 7.
6. Confirm that [REPORT WITH TX IMAGE] is displayed, use [Left cursor] or [Right cursor] to select [ON] to print the first page of the documents under the report, then press [OK].
[OFF]: Does not print the first page.
[ON]: Prints the first page.
NOTE
When forwarding the received documents, the machine does not print the first page of the documents under the report even if [REPORT WITH TX IMAGE] is set to [ON].
7. Press [Stop/Reset] to return to the standby mode.
RX REPORT1. Press [Additional Functions].
2. Press [Left cursor] or [Right cursor] to select [REPORT SETTINGS], then press [OK].
3. Press [Left cursor] or [Right cursor] to select [SETTINGS], then press [OK].
4. Press [Left cursor] or [Right cursor] to select [RX REPORT], then press [OK].
5. Press [Left cursor] to select the setting you want, then press [OK].
[OUTPUT NO]: Does not print a report.
[PRINT ERROR ONLY]: Prints a report only when a reception error occurs.
[OUTPUT YES]: Prints a report every time you receive a document.
6. Press [Stop/Reset] to return to the standby mode.