How to Replace the Toner Cartridge (MF4680)
30-Jan-2012
8201423800
Solution
1. Lift the scanning platform (A) until it is locked. (You will hear an audible [click].)
2. Open the toner cover (B), using the tab (A) which covers over on dent.
(B): Toner cover
3. Remove the toner cartridge.
4. Remove the new toner cartridge from the protective bag.
NOTE
Save the protective bag. You may need it later when you remove the toner cartridge from the machine.
5. Gently rock the toner cartridge five or six times to distribute toner inside.
6. Hold the toner cartridge with one hand, and pull the seal completely out.
NOTE
Do not pull the seal out at an angle.
7. Hold the toner cartridge by its handle.
The arrow (A) on the toner cartridge should be facing away from you and pointing down.
(A): Arrow
CAUTION
Do not open the drum protective shutter on the toner cartridge. Print quality may deteriorate if the drum surface is exposed to light or is damaged.
NOTE
Always hold the toner cartridge by its handle.
8. Insert the cartridge so that the protrusion (A) on the right side of the toner cartridge fits into the guide (B) located on the right side of the machine and slide it down parallel to the guide.
(B): Guide
9. Push the toner cartridge to make sure it is properly set in the machine.
10. Close the toner cover using the tab.
11. Lower the scanning platform.
CAUTION
Be careful not to get your fingers caught.