• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    How to perform the wired LAN setup (Macintosh)

    23-Jan-2012
    8201366400

    Solution

    Wired Setup
    Before Configuring Wired Settings
    REFERENCE
    Make sure that the computer and router are connected.
    After confirming the connection, perform the following instructions to add (connect) the machine to the network.
    A: Internet
    B: Router, etc.

    IMPORTANT
    • Connect the computer to the Internet before the installation.
    • Quit all applications before installation.

    Screens are based on Mac OS X v.10.7. Actual screens may differ depending on the OS version.

    1. Insert the CD-ROM into the computer.
    IMPORTANT
    If the USB cable is already connected, unplug it. If a message appears on the computer, click Cancel.

    2. Double-click the [Setup] icon in the CD-ROM folder, then click [Download] in the subsequent window.



    REFERENCE
    • When the CD-ROM folder does not open automatically, double-click the CD-ROM icon displayed on the desktop.
    • The screen below is displayed while downloading.
    • If you click [Cancel] while downloading, you will see the following screen.
    - If you click [No], you will return to the screen displayed while downloading.
    - If you click [Yes], the download is cancelled. In this case, the files under the download are deleted.
    • When the download fails, the screen below is displayed.
    Click [OK], and you will go back to the screen for downloading in the procedure 2.

    3. When the download is complete, the screen below is displayed. Click [Next].
    REFERENCE
    Select "Save a file for setting up the software again to the download folder after the installation is complete," and the file will be saved to the download folder.
    You can perform the setup later using this file.

    4. In the subsequent screen, enter the administrator name and password. Then click [OK].

    5. Click Next.

    6. Click Network Connection.

    7. Click Wired Connection.

    Follow the instruction and go to step 8.
    REFERENCE
    If an error message is displayed, see "Troubleshooting" at the right.

    8. Follow the instruction until the screen below is displayed.
    Network connection setting is complete.
    Click Next.

    9. Select your place of residence, then click Next.

    10. Select a country or region, then click Next.

    Install the Software (Information)
    Let’s perform the software installation.

    1. Click Next.

    Follow any on-screen instructions to proceed with the software installation.

    2. Click Add Printer.
    REFERENCE
    • The alphanumeric characters after Canon xxx series is the machine’s Bonjour service name or MAC address.
    • If the machine is not detected, make sure of the following.
    - The machine is turned on.
    - The firewall function of any security software is turned off.
    - The machine is connected to the network device with the Ethernet cable.
    REFERENCE
    XXX: xxx refers to the model name you are using.

    3. Select Canon xxx series Canon IJ Network and click Add.
    CAUTION
    If you will be installing the Canon printer driver on Mac OS X and using the printer through a network connection, you can select [Bonjour] or [Canon IJ Network] in the [Add Printer] dialog.
    If [Bonjour] is selected, remaining ink level messages may differ from those indicated by [Canon IJ Network].
    Canon recommends you to use [Canon IJ Network] for printing.

    4. Click Next.

    5. Click Next.

    - Important Information for the Installation

    • If the Extended Survey Program screen appears
    If you can agree to Extended Survey Program, click Agree.
    If you click Do not agree, the Extended Survey Program will not be installed.
    (This has no effect on the machine's functionality.)

    • When the [Test Print] window is displayed
    Test printing will be performed to check the printer's operation.
    Load plain paper into the printer and click [Execute].
    After test printin, click [Next].
    To skip test printing, click [Next] instead of [Execute].

    6. Click Exit to complete the installation.
    Remove the Setup CD-ROM and keep it in a safe place.

    7. Solution Menu EX starts.

    The end of the procedure of the wired LAN setup.

    • Using the Machine from Additional Computers
    Now that the machine is setup on your wired connection, you can install the software and drivers on additional computers on the same network. Additional settings are not required.