Fine-Tuning the Paper Feed Amount (Adj. Fine Feed) (iPF8300S)
16-Mar-2011
8201118100
Solution
If the contrast is uneven or banding in different colors appears at 50 mm (2.0 in) intervals in printed documents, try executing [Adj. Fine Feed] during printing to fine-tune the feed amount.
NOTE
- Always execute [Adj. Quality] before [Adj. Fine Feed].
Once you execute [Adj. Quality], the [Adj. Fine Feed] value will revert to 0.
Perform adjustment as follows.
1.On the [Tab Selection screen] of the Control Panel, press 
or 
to select the Settings/Adj. tab (
).
or to select the Settings/Adj. tab ().
NOTE
- If the [Tab Selection screen] is not displayed, press the [Menu] button.
2.Press the [OK] button.
The [Set./Adj. Menu] is displayed.
3.Press 
or 
to select [Adj. Fine Feed], and then press the OK button.
or to select [Adj. Fine Feed], and then press the OK button.4.Press 
or 
to select a setting value in the range -5 to +5, and then press the [OK] button.
or to select a setting value in the range -5 to +5, and then press the [OK] button. The setting is now applied.