Selecting the Memory for the Recordings

Last Updated : 16-Feb-2011
Issue Number : 8201101700

Solution

You can select to record your movies and photos in the built-in memory or on a memory card. The default memory for recording both is the built-in memory.

1. Set the mode switch to < M >.

2. Turn on the camcorder.

3. Touch [

].

4. Touch [ MENU ].

5. Touch [

].

6.

Drag your finger up and down bring [ Rec Media for Movies ] or [ Rec Media for Photos ] into the orange selection bar,

and touch inside the frame on the right.

7. [

(built-in memory)] (

), [

(memory card A) ] or [

(memory card B) ].

When the built-in memory and card A are selected, you can select [Relay Recording].

[Relay Recording] is a function where the recording destination automatically switches from the built-in memory or card A to a card B when the built-in memory or card A becomes full. For details, see the Related Information.

8. Touch [

] to close the menu.

NOTE

Select to record movies in the built-in memory or memory card if you later want to convert the movies to standard definition in order to upload them to the Web or to create standard DVDs.
When selecting the memory, you can check the approximate available recording time/number of photos, based on currently used settings.