Checking the amount of the built-in memory or memory cards that is currently in use
16-May-2012
8201091900
Solution
This section explains the procedure to check the amount of the built-in memory or memory cards that is currently in use.
1. Set the mode switch to <M> or <CINEMA>.
2. Turn on the camcorder.
3. Touch [ 
].
].
4. Touch [ 
].
].
5. Touch [ 
].
].
6. 
Drag your finger up and down bring [Memory Info] into the orange selection bar, 
and touch inside the frame on the right.
Drag your finger up and down bring [Memory Info] into the orange selection bar, and touch inside the frame on the right.
7. Touch [ 
] (built-in memory), [ 
] (memory card A) or [ 
] (memory card B).
] (built-in memory), [ ] (memory card A) or [ ] (memory card B).
8. Check the memory information, such as the total space.
The following screen appears when you select [Card B].
SD Speed Class Total space
Used space
Total recording time / total number of photos
Available recording time / number of available photosNOTE
- The values are calculated based on the video mode and size of photos(1920×1080) currently set.
- The [Total space] shown for the built-in memory indicates actually usable space. It may be slightly smaller than the nominal built-in memory capacity listed in the specifications.