Solution
You can activate relay recording so if the memory you are using becomes full while recording movies, the recording will continue automatically on a memory card.
When recording in the built-in memory, you can choose to use only memory card A for relay recording (
), or use both memory cards (
). When recording on memory card A, you can use memory card B for relay recording (
).
Confirm the following information regarding the relay recording settings.
Insert a memory card that contains no video recordings into the card slot of the memory card you want to use for relay recording.
- When relay recording from the built-in memory: memory card slot
or both memory card slots.
- When relay recording from memory card A: memory card slot
only.
NOTE
- You cannot use relay recording from the built-in memory to memory card B. When using a single memory card, be sure to insert it into memory card slot .
- During Story Creator mode, relay recording and double slot recording are not available.
1. Set the mode switch to <M> or <CINEMA>.
2. Turn on the camcorder.
3. Touch [
].
4. Touch [
].
5. Touch [
].
6.
Drag your finger up and down bring [ Rec Media for Movies ] into the orange selection bar,
and touch inside the frame on the right.
7. Touch [
] or [
].
8. Touch [Relay Recording].
9. Touch [
] or [
].
If [
] was selected in Step 8, then you can only choose [
].
10. Touch [
] to close the menu.
NOTE
- There will be a momentary stop in the scene at the point where the camcorder switches from one memory to another.
- Any of the following actions will deactivate the relay recording function:
- Turning off the camcorder.
- Opening the double memory card slot cover.
- Changing the position of the mode switch.
- Changing the camcorder’s operating mode.
- Changing the memory used for recording movies.
