Cleaning the Print Head Deeply
14-Jan-2011
8201034800
Solution
If print quality does not improve by the standard cleaning of the Print Head, clean the Print Head deeply. Cleaning the Print Head deeply consumes more ink than the standard cleaning of the Print Head, so clean the Print Head deeply only when necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in the Cassette.
3. Open the Paper Output Tray gently.
4. Clean the Print Head deeply.
(1) Press the Setup button.
The setup menu screen will appear.
(2) Select Maintenance 
, and press the OK button.
, and press the OK button.The Maintenance screen will appear.
(3) Select Deep cleaning, and press the OK button.
The confirmation screen will appear.
(4) Select Yes, and press the OK button.
The machine starts cleaning the Print Head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the Print Head. This takes about 2 to 3 minutes.
The pattern print confirmation screen will appear.
(5) Select Yes, and press the OK button.
The nozzle check pattern will be printed.
(6) When the completion message appears, press the OK button.
The screen will return to the Maintenance screen.
5. Examine the nozzle check pattern.
See step 1 in [ Examining the Nozzle Check Pattern ].
If a particular color is not printed properly, replace the ink tank of that color.
See [ Replacing an Ink Tank ].
If the problem is not resolved, turn off the power and clean the Print Head deeply again after 24 hours. Do not disconnect the power plug when turning off the power.
If the problem is still not resolved, the Print Head may be damaged. Contact the service center.
REFERENCE
- To use other available functions, press the corresponding mode button.