• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    Using the Self-timer (EOS REBEL T3/EOS 1100D)

    14-Feb-2011
    8201031100

    Solution

      The self-timer is useful when you want to photograph yourself or prevent camera shake caused when the shutter is released.

      1. Set the power switch to <ON>.

      2. Press < > button.



      3. Press <Cross Keys> to select the desired self-timer, then press the <SET> button.



      : 10-sec. self-timer.
      : 2-sec. self-timer
      : 10-sec. self-timer plus continuous shots. After selecting , press <Cross Keys> to set the number of multiple shots (2 to 10) to be taken with the self-timer.)

      4. Look through the viewfinder, focus the subject, then press the shutter button completely.
      • You can check the self-timer operation with the self-timer lamp, beeper, and countdown display (in seconds) on the LCD monitor.
      • Two seconds before the picture is taken, the self-timer lamp will stay on and the beeper will sound faster.
      CAUTION
      With [ ], the interval between the multiple shots may be prolonged depending on the shooting functions settings such as the image-recording quality or flash.
      NOTE
      • After taking self-timer shots, you should check the image for proper focus and exposure.
      • If you will not look through the viewfinder when you press the shutter button, attach the eyepiece cover. If stray light enters the viewfinder when the picture is taken, it may throw off the exposure.
      • When using the self-timer to photograph only yourself, use focus lock on an object at about the same distance as where you will stand.
      • To cancel the self-timer after it starts, press the < > button.