Banding Adjustment During Printing (Fine Band Adj.) (iPF815/iPF825)
18-Oct-2010
8200966900
Solution
If, during printing, the contrast is uneven sideways across the paper or banding in different colors appears at 50 mm (2 in.) intervals, try adjusting the feed amount as follows. The results of adjustment are applied to printing in progress, enabling you to check the results immediately. However, note that because printing is paused, colors may be slightly different.
Use Fine Band Adj. after Auto Band Adj. or Manual Band Adj if finer adjustment is required.
NOTE
- The Fine Band Adj. value is reset to 0 if you use Auto Band Adj. or Manual Band Adj.
Execute Fine Band Adj. during printing as follows.
1.Press the Online button to pause printing.
2.Press the Menu button to display the menu during printing.
3.Press 
or 
to select Menu Durng Prtng, and then press the OK button.
or to select Menu Durng Prtng, and then press the OK button. 4.Press 
or 
to select Fine Band Adj., and then press the 
button.
or to select Fine Band Adj., and then press the button.5.Press 
or 
to change the value, and then press the OK button.
or to change the value, and then press the OK button.NOTE
- The supported range is –5 to +5.
6.Press the Online button to resume printing.
