Replacing Ink Tanks (iPF815/iPF825)
18-Oct-2010
8200952900
Solution
Replacement ink tanks in 330 ml (11.2 fl oz) and 700 ml (23.7 fl oz) capacities are supported.
These ink tanks are labeled with a white letter A in a black circle on the side. Request ink tanks with the same label when you purchase new ones.
Take the following precautions when handling ink tanks.
CAUTION
- For safety, keep ink tanks out of the reach of children.
- If ink is accidentally ingested, contact a physician immediately.
IMPORTANT
- When it is time to install ink tanks, before opening the pouch tilt the tank to the left and right gently seven or eight times. If you do not agitate the Ink Tank, ink may settle and can affect printing quality.
- Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.
- Avoid dropping the Ink Tank after removing it from the pouch. Otherwise, ink may leak and cause stains.
- There may be ink around the ink supply section of ink tanks you remove. Handle ink tanks carefully during replacement. The ink may stain clothing.
- We recommend using up an Ink Tank in the course of printing within six months after breaking the seal. Printing quality may be affected if you use older ink tanks.
- Do not leave the printer without ink tanks installed for extended periods (a month or more). Residual ink may become clogged inside the printer and affect printing quality.
You can replace ink tanks if the Display Screen indicates the printer is Online or Offline, or if messages advise you to check the amount of ink left or replace ink tanks.
If a message requests you to replace ink tanks, press the OK button.
Do not remove an Ink Tank during initialization immediately after turning on the printer, or during printhead cleaning.
NOTE
- Ink Tank replacement is possible even when print jobs are being canceled or if paper is being advanced.
NOTE
- This step is not necessary if a message requests you to replace ink tanks. Check the message on the Display Screen and press the OK button. Remove the Ink Tank at this point.
1.Press the Menu button to display MAIN MENU.
2.Press 
or 
to select Rep. Ink Tank, and then press the 
button.
or to select Rep. Ink Tank, and then press the button. 3.Press 
or 
to select Yes, and then press the OK button.
or to select Yes, and then press the OK button.A message on the Display Screen requests you to open the Ink Tank Cover. Remove the Ink Tank at this point.
1.Open the Ink Tank Cover of the tank for replacement and check the Ink Lamp.
The Ink Lamp flashes quickly if there is no ink left.
2.Lift the stopper (a) of the Ink Tank Lock Lever for the color to replace. Lift the Ink Tank Lock Lever until it stops, and then push it down to the front.
NOTE
- Push the Ink Tank Lock Lever down until it locks.
- Make sure the Ink Tank Lock Lever does not return to the original position.
3.Hold the Ink Tank by the grips (a) and remove it. Press the OK button.
CAUTION
- If there is still ink in the Ink Tank you removed, store it with the ink holes (a) facing up. Otherwise, ink may leak and cause stains. Put the Ink Tank in a plastic bag and seal it.
NOTE
- Dispose of used ink tanks according to local regulations.
1.Open the Ink Tank Cover of the tank for replacement and check the Ink Lamp.
The Ink Lamp flashes quickly if there is no ink left.
2.Lift the stopper (a) of the Ink Tank Lock Lever for the color to replace. Lift the Ink Tank Lock Lever until it stops, and then push it down to the front.
NOTE
- Push the Ink Tank Lock Lever down until it locks.
- Make sure the Ink Tank Lock Lever does not return to the original position.
3.Hold the Ink Tank by the handle (a) and remove it. Press the OK button.
CAUTION
- If there is still ink in the Ink Tank you removed, store it in the box with the ink holes (a) facing up. Otherwise, ink may leak and cause stains.
NOTE
- Dispose of used ink tanks according to local regulations.
1.Before opening the pouch, tilt the Ink Tank to the left and right gently seven or eight times.
IMPORTANT
- If you do not agitate the Ink Tank, ink may settle and can affect printing quality.
2.Open the pouch and remove the Ink Tank.
IMPORTANT
- Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink Tank, and affect printing quality.
- Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.
3.Press the OK button and insert the Ink Tank into the holder with the ink holes facing down, as shown.
NOTE
- Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.
If the Ink Tank does not fit in the holder, do not force it into the holder. Make sure the color of the Ink Tank Lock Lever matches the color of the Ink Tank, and check the orientation of the Ink Tank before reloading it.
4.Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place.
5.Make sure the Ink Lamp is lit in red.
NOTE
- If the Ink Lamp is not lit in red, reload the tank.
6.Close the Ink Tank Cover.
The printer will go online or offline.
1.Before opening the pouch, hold the new Ink Tank with both hands and tilt it to the left and right as shown, shaking gently it seven or eight times.
IMPORTANT
- If you do not agitate the Ink Tank, ink may settle and can affect printing quality.
2.Open the pouch and remove the Ink Tank.
IMPORTANT
- Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink Tank, and affect printing quality.
- Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.
3.Press the OK button and insert the Ink Tank into the holder with the ink holes facing down, as shown.
NOTE
- Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.
If the Ink Tank does not fit in the holder, do not force it into the holder. Make sure the color of the Ink Tank Lock Lever matches the color of the Ink Tank, and check the orientation of the Ink Tank before reloading it.
4.Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place.
5.Make sure the Ink Lamp is lit in red.
NOTE
- If the Ink Lamp is not lit in red, reload the tank.
6.Close the Ink Tank Cover.
The printer will go online or offline.