Shooting subjects up close (PowerShot SX30 IS)
21-Sep-2010
8200922500
Solution
If you are shooting a subject at a close distance, and if the subject cannot be easily focused within the normal shooting range, switching the normal mode to the [Macro] (
) mode will make it easier to focus on the subject.
) mode will make it easier to focus on the subject. NOTE
- The distance of each focusing range is as follows (from the end of the lens).
- [Normal] (
) : 0 cm (0 in.) - infinity (W)*, 1.4 m (4.6 ft.) - infinity (T)** - [Macro] () : 0 cm (0 in.) - 50 cm (1.6 ft.) (W)*
* (W): When turning the <Zoom Lever> toward <Wide Angle> (
) to the maximum wide angle side (Max. wide angle).
) to the maximum wide angle side (Max. wide angle).** (T): When turning the <Zoom Lever> toward <Telephoto> (
) to the maximum telephoto side (Max. telephoto).
) to the maximum telephoto side (Max. telephoto).CAUTION
- The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program] (
). - The edges of the image may darken if the flash fires.
- To set the [Macro] (), it is necessary to set the [Shooting Mode] to one of the following modes.
- [Manual] (
), [Aperture Priority] (
), [Shutter Speed Priority] (
), [Program] (), [Color Accent] (
), [Color Swap] (
), [Standard (Movie) ] (
), [Color Accent (Movie) ] (
), [Color Swap (Movie) ] (
)
), [Aperture Priority] (), [Shutter Speed Priority] (), [Program] (), [Color Accent] (), [Color Swap] (), [Standard (Movie) ] (), [Color Accent (Movie) ] (), [Color Swap (Movie) ] ()1. Press the <Power> button on the camera.
2. Press the <Macro / Manual Focus> ( / 
) button.
/ ) button.
3. The following screen appears.
Operate the <directional buttons> left or right to set [Macro] ().
).If [Macro] () is indicated on the LCD Monitor, the camera is in [Macro] () mode.
) is indicated on the LCD Monitor, the camera is in [Macro] () mode.
REFERENCE
Try attaching the camera to a tripod and shooting in [2 sec. Self-Timer] (
) to prevent the camera from moving and blurring the image.
) to prevent the camera from moving and blurring the image.NOTE
- The screen indications when operating the <Zoom lever> in [Macro] () mode are as follows.
When you move the <Zoom lever>, 
the [Zoom bar] appears on the screen.
the [Zoom bar] appears on the screen.The camera cannot focus in the 
yellow portion of the bar (When zooming within the range of the yellow bar, 
(
) will be grayed out and shooting will be done in ().
yellow portion of the bar (When zooming within the range of the yellow bar, () will be grayed out and shooting will be done in ().
The focusing range appears when shooting.