Changing the Aspect Ratio (PowerShot S95)
27-Aug-2010
8200882400
Solution
You can change the width to height ratio of an image.
CAUTION
- The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program] (
). - In the following shooting modes, you cannot set the [Aspect Ratio].
- [Low Light] (
), [Nostalgic] (
), [Fish-eye Effect] (
), [Miniature Effect] (
), [Stitch Assist] (
)
), [Nostalgic] (), [Fish-eye Effect] (), [Miniature Effect] (), [Stitch Assist] ()1. Press the <Power> button on the camera.
2. Press the <FUNC./SET> (
) button.
) button.3. The following window appears.
Operate the <directional buttons> up or down to select [4:3].
Operate the <directional buttons> left or right to select an aspect ratio of your choice.After making these settings, press the <FUNC./SET> () button.
) button.| Aspect Ratio | |
|---|---|
 | Same aspect ratio as wide screen high definition televisions. |
 | Same aspect ratio as 35mm film. Suitable for printing out 5" x 7" or postcard sized images. |
 | Same aspect ratio as the screen of this camera. Suitable for printing out 3.5" x 5" sized images. |
 | Square-shaped aspect ratio. |
 | An aspect ratio well suited for portraits. |
NOTE
- The aspect ratio for (
) and (
) images is fixed at (). - The digital zoom is only available in ().
- You can also set the camera so that turning the <Control Ring> changes the aspect ratio. For setting the <Control Ring>, please see How to change Control Ring functions.