• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    Using the rating function to add rating marks to your favorite images captured with the EOS 60D

    31-Aug-2010
    8200870800

    Solution

      With the Rating function, you can give one of five ratings ( / / / / ) to images and movies. This is a convenient function to only display the images that have these rating marks.
      The details about how to add the rating marks are as follows.

      1. Flip out the LCD monitor, and then set the power switch to <ON>.
      For the details about how to open the LCD monitor, see How to use the vari-angle LCD monitor of the EOS 60D.

      2. Press the <MENU> button to display the menu.



      3. Under the [ ] tab, select the [Rating] menu, then press <SET> button.



      4. Turn the <Quick Control Dial> to select the image or movie to be rated.
      You can display three images by pressing the < > button. To return to the single-image display, press the < > button.



      5. Press < > (Multi-controller) up or down to select a rating mark.
      • The total number of images and movies rated will be counted for each rating.
      • To rate another image or movie, repeat steps 4 and 5.



      6. To exit and return to the menu, press the <MENU> button.
      NOTE
      • With the [Image jump w/ ] menu under the [ ] tab, you can display only the rated images and movies. With the [Slide show] menu, you can playback only the rated images and movies.
      • With the provided software (Digital Photo Professional etc.), you can select only the rated images and movies.
      • With Windows Vista and Windows 7, you can check the rating with the file information display or the provided image viewer.