Solution
Using video snapshot mode, you can capture 2, 4, or 8 seconds short scenes (video snapshot scenes) that you can playback with a background music that is different from the actual recorded sound. Please refer to
What is the Video Snapshot function? for details.
You can capture video snapshot scenes from a previously recorded scene.
1. Press <
> to switch to movie playback mode.
2. Touch [
], select the built-in memory(
only), Card A, or Card B, and then select [ Original ] or [ Playlist ] to display the index screen.
3. Play back the desired scene.
4. Press < START / STOP > to capture the video snapshot scene.
- During playback, a movie is copied and it is then converted into a video snapshot scene.
- When the camcorder stops recording, the screen will momentarily turn black as if a camera shutter had released.
5. Touch [
] to return to the index screen.
CAUTION
- A video snapshot scene can be captured only during playback; it cannot be captured during playback pause mode.
- The captured video snapshot scene is saved to the same memory that contains the source scene.
NOTE
- Video snapshot scenes cannot be captured from any of the following types of scenes.
-Scenes shorter than 1 second
-Scenes that were edited using the supplied software ImageMixer 3 SE and were then written back to the camcorder.
- When the source scene is itself a video snapshot scene, you may not be able to capture a video snapshot scene depending on the length of the source scene and the length currently selected for video snapshot scenes.
- When you start capturing a video snapshot scene less than 1 second from the end of the scene, the video snapshot scene will be captured starting from the beginning of the following scene.
- During the playback of video snapshot scenes captured from a previously recorded movie, you may notice some anomalies in the picture/sound at the point where the playback switches to a new scene.