Basic Methods for Sending Faxes

Last Updated : 16-Dec-2011
Issue Number : 8200753900

This section describes the flow of sending faxes.

NOTE

If <RESTRICT NEW ADD.> is set to <ON>, you cannot specify fax numbers using

-

,

[numeric keys] and

[Tone]. Make sure that <RESTRICT NEW ADD.> is set to <OFF>.

1. Place documents.

2. Press

[SEND/FAX].

The SEND/FAX indicator lights up and the machine enters the send standby mode.

3. Press

[SEND/FAX] repeatedly to select <FAX>, then press [OK].

4. Use

-

,

[numeric keys] and

[Tone] to specify the fax number.

If you enter a wrong number when specifying a fax number, press

to delete the number.

5. Press

[Start].

When you place the documents on the platen glass, press

or

to select the document size, then press

[Start] for each document. When scanning is complete, press [OK] to start sending.

You can also adjust the following scan settings as necessary, using the keys on the operation panel, after specifying the destination in step 4.

Scanning starts, and the scanned data is sent to the specified fax number.