Copying data from the built-in memory to an SD memory card
18-Mar-2010
8200752600
Solution
CAUTION
-
Because there is no built-in memory, data cannot be transferred between the built-in memory and a memory card.
You can copy original movies or the entire playlist only from the built-in memory to the corresponding location on the memory card. Use this function to copy movies from the built-in memory to the memory card in order to play them back with music tracks.
1. Press < 
( camera/play ) > to switch to movie playback mode.
( camera/play ) > to switch to movie playback mode.
REFERENCE
To copy scenes in the playlist, press the < 
> button, and to copy video snapshot scenes, press the < VIDEO SNAP > button. To copy video snapshot scenes in the playlist, press both the < > and < VIDEO SNAP > buttons at the same time.
> button, and to copy video snapshot scenes, press the < VIDEO SNAP > button. To copy video snapshot scenes in the playlist, press both the < > and < VIDEO SNAP > buttons at the same time.2. Select the scenes recorded in the built-in memory.
- Copies to the memory card all the scenes selected in advance (marked with a [
] checkmark ). - To copy all the scenes that were recorded on a specific date, select one of the scenes within the specified date.
- This step is not necessary to copy all scenes
3. Press < FUNC. >.
4. Copy the scene(s).
4-1. Select [ 
Copy ( 
) ] and press < SET >.
Copy ( ) ] and press < SET >.
4-2. Select [ All Scenes ] , [ All Scenes (this date) ], [ This Scene ] or [ Selectid Scenes ] , and then press < SET >.
4-3. Select [ Yes ], and then press < SET > to start copying.
Press < SET > to interrupt the operation while it is in progress.
5. After the operation is completed, press < FUNC. >.
CAUTION
- Observe the following precautions while the ACCESS indicator flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
- If the memory card slot cover is open, or the LOCK switch on the memory card is set to prevent writing, you will not be able to copy movies to the memory card.
- Scenes that were edited using the supplied software PIXELA ImageMixer 3 SE Ver.6 and were then written back to the camcorder cannot be copied to the memory card.
You can copy photos only from the built-in memory to the memory card.
1. Press < ( camera/play ) > to switch to photo playback mode.
( camera/play ) > to switch to photo playback mode.2. Select < 
> the photo you want to copy and press < SET >.
> the photo you want to copy and press < SET >.
3. Press < FUNC. >.
4. Copy a photo.
4-1. Select [ 
Copy( ) ] and Press < SET >.
Copy( ) ] and Press < SET >.
4-2. If you are satisfied with the photo that is displayed on the screen, press < SET > again.
You can select a different photo by operating the joystick left to right.
4-3. Select [ Yes ] and press < SET > to copy the photo.
5. After the operation is completed, press < FUNC. > twice to finish.
You can copy the photos that were selected in advance or all photos at once. You can also select and copy a specific photo from the index screen.
1. Press < ( camera/play ) > to switch to photo playback mode.
( camera/play ) > to switch to photo playback mode.2. Select < 
, > the photo you want to copy.
, > the photo you want to copy.- Copies all the photos selected in advance (marked with a [ ] checkmark ).
- This step is not necessary to copy all photos.
3. Press < FUNC. >.
4. Copy the photos.
4-1. Select [ Copy( ) ] and press < SET >.
Copy( ) ] and press < SET >.
4-2. Select [ All Photos ], [ This Photo ], or [ Selected Photos ], and then press < SET >.
4-3. Select [ Yes ], and then press < SET > to start copying.
If you selected [ Selected Photos ] or [ All Photos ], you can press < SET > to interrupt the operation while it is in progress.
5. After the operation is completed, press < FUNC. >.
CAUTION
- Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
- When copying photos onto an Eye-Fi card, photos will be uploaded automatically if you are within the range of a configured network. This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer.
- If there is not enough space on the memory card, as many photos as possible will be copied before stopping the operation.
- If the memory card slot cover is open, or the LOCK switch on the memory card is set to prevent writing, you will not be able to copy photos to the memory card.