Editing the Movies with the Camera (Editing the First and Last Scenes of a Movie)
11-Mar-2010
8200747800
Solution
With your camera, you can edit out the first and last scenes of a movie in 1-sec. increments. You can select [Overwrite] to save and overwrite the original movie, or [New file] to save the movie as a new movie. This operation is carried on the movie playback screen.
1. Set the power switch to <ON>.
2. Press the < 
> button to display the image.
> button to display the image.
3. Press the <Cross Keys> to select a movie.
- With the single-image display, the [
] icon displayed on the upper left indicates that it is a movie. - During the index display, the perforation on the left edge of the image indicates that it is a movie. As movies cannot be played on the index display, press <SET> button to switch to the single-image display.
4. On the single-image display, press <SET> button.
The movie playback panel will appear on the bottom.
5. Press the <Cross Keys> to select [ 
], then press <SET> button.
], then press <SET> button.The editing screen will be displayed.
6. Specify the parts to be edited out.
6-1. Press the <Cross Keys> to select either [ 
] (Cut beginning) or [ 
] (Cut end), then press <SET> button.
] (Cut beginning) or [ ] (Cut end), then press <SET> button.
6-2. Press the <Cross Keys> to see the previous or next frames. Holding it down will fast forward the frames.
- After deciding which part to edit out, press <SET> button.
- The portion highlighted in blue on the top of the screen is what will remain.
- Since the editing is done in 1-sec. increments (position indicated by [
]), the exact position where the movie is edited may differ slightly from the position you specified.
7. Check the edited movie.
- Press the <Cross Keys> to select [
] and press <SET> button to playback the portion highlighted in blue. - To change the editing, go back to step 6.
- To cancel the editing, select [
] and press <SET> button.
8. Press the <Cross Keys> to select [ 
], then press <SET> button to save the movie. The save screen will appear.
], then press <SET> button to save the movie. The save screen will appear.To save it as a new movie, select [New file]. Or to save it and overwrite the original movie file, select [Overwrite]. Then press <SET> button.
NOTE
If the card does not have enough room, [New file] will not be selectable.