Sending Faxes
24-Dec-2009
8200692100
Solution
This section describes dialing and sending faxes directly using the Numeric buttons.
IMPORTANT
If you enter or register an incorrect fax/telephone number with the Numeric buttons, the fax will be sent to an unexpected recipient. When sending an important fax, we recommend sending the fax after confirming the recipient's condition.
You need to prepare:
Originals to send.
1. Prepare for sending a fax.
(1) Make sure that the power is turned on.
(2) Load the original in the ADF or on the Platen Glass.
IMPORTANT
When sending a double-sided document, load the document on the Platen Glass. You cannot scan double-sided documents in the ADF.
(3) Press the FAX button.
2. Adjust the scan contrast and resolution as necessary.
(1) Press the FAX Quality button.
The Scan contrast screen will appear.
(2) Use the 
(-) or 
(+) button to select the scan contrast.
(-) or (+) button to select the scan contrast.
The (-) button decreases the scan contrast, and the (+) button increases the scan contrast.
(-) button decreases the scan contrast, and the (+) button increases the scan contrast.(3) Press the OK button.
The Scan resolution screen will appear.
(4) Use the (-) or (+) button to select the scan resolution.
(-) or (+) button to select the scan resolution.
Standard: Suitable for text-only documents.
Fine: Suitable for fine-print documents.
Extra fine: Suitable for detailed illustration or fine-print quality documents.
If the recipient's fax machine is not compatible with Extra fine (300x300dpi), the fax will be sent in the Standard or Fine resolution.
Photo: Suitable for photographs.
NOTE
The color fax is sent with the resolution for Photo.
(5) Press the OK button.
3. Send the fax.
(1) Use the Numeric buttons to dial the recipient's fax/telephone number.
In the fax/telephone number entry field, the following operations are available.
- Press a Numeric button to enter that number.
- Press the (+) button to enter a space.
(+) button to enter a space.- Press the (-) button to delete the last number you entered.
(-) button to delete the last number you entered.- Press the 
button to enter "#", and the 
button to enter "
".
button to enter "#", and the button to enter "".- Press the Redial /Pause button to enter a pause "P".
(2) Press the Color button for color sending, or the Black button for black & white sending.
The machine starts scanning the original.
IMPORTANT
- Color sending requires that the recipient's fax machine supports color faxing. If the recipient's fax machine does not support color faxing, you can set the machine to send a fax in black-and-white.
- Do not open the Document Cover until scanning is completed.
(3) Start sending.
When the document was loaded in the ADF
The machine scans the document automatically and starts sending the fax.
NOTE
To cancel sending the fax, press the Stop button, and follow the message on the LCD. If documents remain in the ADF after pressing the Stop button, follow the message and press the OK button. The remaining documents are automatically fed out.
When the original was loaded on the Platen Glass
The message will appear after scanning the original.
To send the scanned page, press the OK button to start sending it.
NOTE
- To send two or more pages, follow the message to load the next page, and press the Color or Black button. After scanning all pages, press the OK button to start sending.
- To cancel sending the fax, press the Stop button.
NOTE
- When your machine is connected to a PBX (Private Branch Exchange) system, refer to the operating instructions of the system for details on dialing the recipient's fax/telephone number.
Automatic redialing
- When the recipient's line is busy, the machine will redial the number after a specified interval.
1. Prepare for sending a fax.
(1) Make sure that the power is turned on.
(2) Load the original in the ADF or on the Platen Glass.
(3) Press the FAX button.
2. Adjust the scan contrast and resolution as necessary.
See step 2 in Sending a Fax with the Numeric Buttons.
3. Select the recipient to redial.
(1) Press the Redial/Pause button.
The fax/telephone number last dialed with the Numeric buttons will be displayed.
(2) Use the (-) or (+) button to select the fax/telephone number to redial.
(-) or (+) button to select the fax/telephone number to redial.
(3) Press the OK button.
The selected number will appear in the fax sending screen.
4. Send the fax.
(1) Press the Color button for color sending, or the Black button for black & white sending.
The subsequent procedure varies depending on whether to load the original in the ADF or on the Platen Glass.
For details, see (3) of step 3 in Sending a Fax with the Numeric Buttons.