Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused. Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

Selecting the Receive Mode that Suits Your Needs

Last Updated : 13-Oct-2011
Issue Number : 8200508400

The receive mode determines how the machine responds to incoming faxes and voice calls. Select the fax receive mode to suite your needs.

The default setting is <FaxOnly>.

1. Press

[Menu].

2. Press

to select <TX/RX SETTINGS>, then press [OK].

3. Press

to select <FAX SETTINGS>, then press [OK].

4. Press

to select <RX MODE>, then press [OK].

5. Press

to select the desired receive mode, then press [OK].

<FaxOnly>: Answers all calls as faxes.
<FaxTel>: Switches between fax and voice calls automatically.
<AnsMode>: Receives faxes automatically and records voice messages.
<NET SWITCH>: Telstra FaxStream™ Duet (Only for Australia) and Telecom FaxAbility (Only for New Zealand).
<Manual>: Does not answer any calls. You have to manually receive faxes.

NOTE

For <FaxTel> or <Manual>, make sure an external telephone is connected to the machine.
For <AnsMode>, make sure an answering machine is connected to the machine.

6. Press

[Stop/Reset] to return to the standby mode.