Solution
If you connect a Canon camera to the printer, you can trim the image on your camera for printing.
CAUTION
- These instructions show how to print one image on one sheet of paper as an example.
1. Connect the camera to the printer and turn on the printer.
Connect the printer and camera with the interface cable that came with your camera.
Turn on the printer.
2. Press the <Playback> (
) button to turn on the camera.
3. The following screen appears on your camera's LCD monitor. Confirm that [SET] appears on the screen.
4. Operate the <directional buttons> left or right to display an image to print on the LCD monitor. When the desired image is shown, you want to print, press the <FUNC./SET> (
) button.
5. The following screen appears. Select [Paper Settings], and press the <FUNC./SET> (
) button.
CAUTION
[Paper Settings] must be selected before [Trimming]. If you select [Paper Settings] after [Trimming], [Trimming] needs to be reset.
6. The following screen appears. Select the [Paper Size] to print, and press the <FUNC./SET> (
) button.
7. The following screen appears. Select [Paper Type] (Type of paper), and press the <FUNC./SET> (
) button.
8. The following screen appears. Specify [Borders] and the number of prints made on one sheet, and press the <FUNC./SET> (
) button.
9. The following screen appears. Select [Trimming], and press the <FUNC./SET> (
) button.
10. The following screen appears. The green frame displayed on the LCD monitor indicates the print range.
11. Adjust the print range by moving the green frame.
Operate the <directional buttons> up or down to change the position of the frame.
If you want to rotate the green frame, press the <DISP.> (
) button.
To enlarge or reduce the size of the print range, use the camera <Zoom Lever>.
Makes the print range larger.
Makes the print range smaller.
When the print range is set where you want it, press the <FUNC./SET> (
) button.
12. The following screen appears.
Confirm the print range. The print range will be within the green frame.
Confirm the paper, size, and [Borders] settings for printing.
Specify the number of copies to make.
After having confirmed the settings,
select [Print], and press the <FUNC./SET> (
) button.
13. When printing starts, the following screen will appear.
14. The trimmed image will be printed.
This completes the process of printing after trimming.
