• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    How Do I Format the Card ?(EOS 5D Mark II)

    12-Nov-2008
    8200356000

    Solution

      If the card is new or was previously formatted by another camera or personal computer, format the card with the camera.
      CAUTION
      Formatting the card will erase everything in the card. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images to a personal computer before formatting the card.

      1. Turn the camera's power switch to < > (Quick Control Dial).



      2. Press the <MENU> button to bring up the menu.



      3. Turn the <Main Dial> to select [ ] tab.



      4. Turn the <Quick Control Dial> to select [Format], press <SET> button.



      5. Turn the <Quick Control Dial> to select [OK], then press <SET> Button.
      • The card will be formatted.
      • When the formatting is completed, the menu will reappear.



      IMPORTANT
      When the card is formatted, only the file management information is changed. The actual data is not completely erased. Be aware of this when selling or discarding the card. When discarding the card, execute low-level formatting or destroy the card physically to prevent the data from being leaked.

      REFERENCE
      The card's capacity displayed on the format screen may be lower than the capacity indicated on the card.