Solution
Broadcasting enables you to send a copy of the same document to multiple recipients.
NOTE
- A maximum of 301 (201 for the imageCLASS MF8450C) destinations can be specified at a time. (Out of the 301 or 201 destinations, one new destination can be specified.) If you specify a group of several destinations, each destination is counted as a separate address.
- If you frequently send documents to multiple destinations, it is recommended that you store those destinations as a group.
- When <Restrict Seq. Broadcast> is set to <Prohibit Broadcast>, you cannot send documents to multiple recipients.
- You cannot cancel sending a document to only one destination out of the multiple destinations.
- If you specify e-mail or file server addresses as destinations, <Color/File Format Settings> appears on the Send Settings screen. However, this setting is disabled when sending faxes.
2. Press
(Main Menu).
3. Use [
] , [
] or
(Scroll Wheel) to select <Send/FAX>, then press [OK].
4. Specify a destination.
5. Press the right Any key to select <Add Destination>.
6. Repeat step 4 and 5 until all the destinations are set.
NOTE
- Only one new destination can be specified. If you add destinations, specify them from the Address Book.
- You cannot specify the detailed settings for each destination.
7. Press
(Start).
- Scanning starts if the original is placed in the feeder, and the scanned data is sent to the specified destination when scanning is complete.
- To cancel scanning, press the left Any key to select <Cancel> or press
(Stop).
8. Use [
] , [
] or
(Scroll Wheel) to select the original size, then press [OK].
9. Press
(Start).
10. Follow the instructions on the display, then press
(Start) once for each original.
11. When scanning is complete, press the right Any key to select <Done>.
- Scanning starts, and the scanned data is sent to the specified destination when scanning is complete.
- To cancel scanning, press the left Any key to select <Cancel> or press (Stop).
