26-Aug-2008
8200265200
| The following messages may appear on the LCD monitor during shooting or playback. | |
| No memory card | The memory card may be inserted in the wrong orientation. Insert the memory card in the correct orientation. |
| Card locked! | The SD memory card or SDHC memory card's write protect tab is set to "Lock". Unlock the write protect tab. |
| Cannot record! | You attempted to shoot an image without a memory card installed or with a memory card installed in the wrong orientation. You cannot attach sound memos to movies. |
| Memory card error | The memory card is malfunctioning. Formatting the memory card may solve the problem. If this error message appears even when using the supplied memory card, contact your Canon Customer Support Help Desk as there may be a problem with the camera. |
| Memory card full | There is not enough free space on the memory card. Erase the images to open space for new images, or insert an empty memory card. |
| Change the batteries | Battery charge is low. Change the batteries. |
| No Image. | There are no images recorded on the memory that can be displayed. |
| Protected! | Protected images, movies or sound memos cannot be erased. Remove protection before erasing. If [Protect] (  ) appears in the lower-left corner of the playback screen, the image is being protected. Follow the procedures below to remove the protection.･ Press the <Playback> (  ) button, and then turn the power on. Select the <MENU> button > the [Playback] ( ) menu > [Protect], and then select the image for which you want to remove protection. Next, press the  ). |
| Unidentified Image / Incompatible JPEG / Image too large. / RAW | Unsupported images or data, or corrupted image data cannot be displayed. Images manipulated on a computer, that have had their file name changed, or have been taken with a different camera may not display. |
| Cannot magnify! / Cannot rotate / Cannot modify image | Unsupported images cannot be magnified, rotated or edited. Images manipulated on a computer, that have had their file name changed, or have been taken with a different camera may not be magnified, rotated or edited. Movies cannot be magnified or edited. |
| Incompatible WAVE | Since the data type of the existing sound memo is incorrect, no new sound memo can be added or played back. |
| Naming error! | The file name could not be created because there is an image with the same name as the folder that the camera is attempting to create, or the highest possible file number has already been reached. In the [Settings] ( ) tab, set [File Numbering] to [Auto Reset] or format the memory card. |
| Cannot transfer! | Unsupported or corrupted image data cannot be transferred, even when set in Direct Transfer. Movies selected in [Wallpaper] cannot be transferred. |
| Too many marks | The number of images for print settings or transfer settings exceeds 998. Set 998 or less images for print or transfer. |
| Cannot complete! | Print settings or transfer settings could not be saved correctly. Reduce the number of settings and try again. |
| Unselectable image | Unsupported images cannot be set for printing. Images manipulated on a computer, that have had their file name changed, or have been taken with a different camera may not be supported. |
| Communication error | Images could not be transferred to the computer due to the large amount of images (approx. 1000) stored on the memory card. Use a commercially available USB card reader to transfer the images. |
| Lens error, restart camera | A lens error was detected. Press the power button to turn the camera off and back on. If this error message continues to display, contact your Canon Customer Support Help Desk as there may be a problem with the lens. This error can occur if you hold the lens while it is in motion or when using it in a location with excessive dust or sand in the air. |
| Exx (xx: number) | Camera detected an error. Press the power button to turn the power off and then back on. If an error code displays directly after taking a picture, the shot may not have been recorded. Check image in playback mode. If this error code reappears, note the number and contact your Canon Customer Support Help Desk as there may be a problem with the camera. |
| The following messages may appear on the camera's LCD monitor. Printing with SELPHY ES Series / SELPHY CP Series Printers using PictBridge | |
| No Paper | Paper cassette is incorrectly inserted or out of paper. Or the paper feed is not operating correctly. |
| No Ink | The ink cartridge has not been inserted or has run out of ink. |
| Paper and ink do not match | The paper and ink are from different sets. |
| Paper Jam | The paper jammed during printing. |
| Print output tray is full | Remove paper from the print output tray. |
| Paper Error | The paper is not correctly set in the printer. |
| Cartridge not compatible | Cartridge is not compatible. |
| Ink Error | The ink cassette is experiencing a problem. |
| Recharge the printer battery | The printer's battery pack is depleted. |
| Readjust trimming | You attempted to print the image with a different style than the one used when the trimming settings were set. |
| Hardware Error | Check whether or not an error other than a paper or ink error has occurred. |
| File Error | You tried to print an image that is not compatible with PictBridge. Some images that have been recorded with another camera or modified using a computer cannot be printed. |
| Print error | There is an error in the settings. Turn off the printer and turn it on again, then set the print settings correctly. |
| The following messages may appear on the camera LCD monitor. Printing with Bubble Jet Printers (PIXMA Series / SELPHY DS Series) using PictBridge | |
| No Paper * | Set paper in the printer, then execute printing again. |
| Paper Jam | The paper jammed during printing. Select [Stop] to cancel printing. Remove the jammed paper, reset some other paper in the printer, then print again. |
| Paper Error | Either the paper is not set correctly in the printer, or paper that differs from the setting has been set in the printer. Confirm the type and size of paper being used. Also open the paper output tray if it is closed. In addition, close the CD-R tray guide when it is open. |
| No Ink Ink Cassete Error | The ink tank has run out of ink or there is no ink tank in the printer. The number of times that the printer's error lamp blinks, and the error message displayed, will indicate the appropriate remedy for the error. Please refer to the printer's user guide for the remedy. |
| Low ink level * | The ink tank needs to be replaced soon. Prepare a new ink tank. If you select [Continue] in the error screen, you can restart printing. |
| Ink absorber full * | You can restart printing if you select [Continue] in the error screen. Please request replacement of the ink absorber from your nearest Canon Customer Support center listed in the contact list provided with the printer or in the user guide. The ink absorber cannot be replaced by the user. |
| Ink Error | There is a problem with the ink. If the printer's error lamp is blinking and an error message is displayed, please refer to the printer's user guide to ascertain the problem and its remedy. |
| Printer error | Disconnect the cable from the printer and turn off the printer power. Then reconnect the cable and turn on the printer. If the error persists, please request a repair from your nearest Canon Customer Support Center (listed in the contact list provided with the printer). |
| Printer in use | The printer is warming up or in use. The printer automatically starts printing the images from the camera after completing the current printing. Also, when a message displays regarding checking the position of the paper thickness lever, check the position of the paper thickness lever, then press the OK button on the printer. |
| Adjust the paper thickness lever to the proper position. | |
| Printer cover open | Close the printer cover securely. |
| No print head | If the printer's error lamp is blinking and an error message is displayed, please refer to the printer's user guide to ascertain the problem and its remedy. |
| Hardware Error | If the printer's error lamp is blinking and an error message is displayed, please refer to the printer's user guide to ascertain the problem and its remedy. |
| File Error | You tried to print an image that is not compatible with PictBridge. Some images that have been recorded with another camera or modified using a computer cannot be printed. |
| Incompatible paper size | Paper of a different size than the specified paper size is set to the printer. Select [Continue] on the error screen to display the paper size setting screen. Correct the paper size using the screen (only the selectable paper sizes appear on the screen). |
| Print error | Check that the correct paper size is selected. If this error message appears even when the correct paper size is set, turn off the printer, then turn it on again. If the error persists, please request a repair from your nearest Canon Customer Support Center (listed in the contact list provided with the printer). |
| Check print settings | Unprintable settings are included. Select [Continue] on the error screen to display the print order screen. Check the print settings (only the printable settings appear on the screen), change the settings if necessary, then print again. |
| The following messages may appear on the camera LCD monitor. Printing with SELPHY CP Series Printers using Canon Direct Print | |
| No Paper | Paper cassette is incorrectly inserted or out of paper. Or the paper feed is not operating correctly. |
| No Ink | The ink cartridge has not been inserted or has run out of ink. |
| Incompatible paper size | Wrong paper size is loaded in the printer. |
| Incompatible ink size | Wrong ink cassette size is loaded in the printer. |
| Ink Cassette Error | The ink cassette is experiencing a problem. |
| Paper and ink do not match | The paper and ink are from different sets. |
| Paper Jam | The paper jammed during printing. |
| Paper has been changed | Paper size was changed after the print style was displayed. |
| Recharge the printer battery | The printer's battery pack is depleted. |
| Communication Error | The printer is experiencing a data transmission error. |
| Readjust trimming | You attempted to print the image with a different style than the one used when the trimming settings were set. |
| Cannot Print! | You attempted to print an image that was photographed with another camera, one recorded in a different data type, or one that has been edited on a computer. |
| Could not print xx images | You attempted to use the DPOF print settings to print xx images that were photographed with another camera, that have been recorded in a different data type, or that have been edited on a computer. |
