Issue
Cause and Solution
NOTE
Opening the Scanning Unit (Printer Cover) while printing moves the FINE Cartridge Holder to the right. Close the Scanning Unit (Printer Cover), and reopen it after printing finishes.
Check if the POWER lamp is lit green.
The FINE Cartridge Holder will not move unless the power is on. If the POWER lamp is off, close the Scanning Unit (Printer Cover) and turn the machine on.
While the POWER lamp is flashing green, the machine is initializing. Wait until the POWER lamp stops flashing and remains lit green, and then open the Scanning Unit (Printer Cover) again.
An error has occurred on the machine
The Scanning Unit (Printer Cover) has been left open for 10 minutes or longer
If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the FINE Cartridge Holder moves to the right to prevent the Print Head from drying out. Close and reopen the Scanning Unit (Printer Cover) to return the FINE Cartridge Holder to the left.
The machine has been printing continuously over a long period
If the machine has been printing continuously for a long time, close the Scanning Unit (Printer Cover), wait a few minutes, then reopen it.
If the machine has been printing continuously for a long time, the Print Head will overheat, and the machine stops printing temporarily to protect the Print Head.
In this case, close the Scanning Unit (Printer Cover) for a while, then reopen it to move the FINE Cartridge Holder to the left.